In this review, we will be comparing Airmotiv XT3 and Airmotiv T3+, two Passive Floor-standing speakers by Emotiva Let's have a brief look at the main features
of Emotiva Airmotiv XT3 and Emotiva Airmotiv T3+ first before getting into our more
detailed comparison.
What size room are the Emotiva Airmotiv XT3 and Emotiva Airmotiv T3+ speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv XT3 and Emotiva Airmotiv T3+ compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Airmotiv XT3 and Airmotiv T3+ are 3-way speakers.
| Driver |
Emotiva Airmotiv XT3 |
Emotiva Airmotiv T3+ |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
25×32 mm-inch
|
25×32 mm-inch
|
|
Midrange
|
2 x 5.25-inch |
2 x 5.25-inch |
|
Woofer
|
3 x 8-inch
|
3 x 8-inch
|
Airmotiv XT3 features a 25×32 mm" folded ribbon Tweeter , a 5.25" Midrange and 3 x 8" woven fiber cone Woofer with a Crossover frequency at 300 Hz, 3.1 kHz. On the other hand, the Airmotiv T3+ features a 25×32 mm" folded ribbon Tweeter , a 5.25" Midrange and 3 x 8" woven fiber cone Woofer with a Crossover frequency at 350 Hz and 2800Hz.
Frequency Response
Airmotiv XT3 has a frequency range of 30 Hz – 27 kHz whereas Airmotiv T3+ has a frequency range of 29 Hz – 28 kHz. With a minimum frequency of 29Hz, the Airmotiv T3+ can go slightly deeper then the Airmotiv XT3's min frequency of 30Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv XT3 and Airmotiv T3+ have the same Impedance of 4 ohms and their sensitivity is also same at 91 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Airmotiv XT3 and the Airmotiv XT3 can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Airmotiv XT3 can handle a max power of 300 watts RMS from the amp the whereas Airmotiv T3+ has a max power handling value of 250 watts RMS, 50 watts less than the Airmotiv XT3.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Airmotiv XT3 and Airmotiv T3+ features dual binding post speaker terminals for bi-amping or bi-wiring.
Emotiva Airmotiv XT3's Binding post terminals allows Bi-amping or bi-wiring
Emotiva Airmotiv T3+'s Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Airmotiv XT3 and Airmotiv T3+ have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv XT3's and Emotiva Airmotiv T3+'s external dimensions. Emotiva Airmotiv XT3 has external dimensions of 1240 x 273 x 425 mm ( 48.7” x 10.75” x 16.75”) whereas Emotiva Airmotiv T3+ has external dimensions of 1258.0 x 318.0 x 432.0mm ( 49-1/2-inch x 12-1/2-inch x 17-inch) .
Emotiva Airmotiv T3+ is clearly the larger of the two speakers. Its body is 3mm wider, 18mm taller and 7mm deeper than Emotiva Airmotiv XT3.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv XT3 is approximately 1160.3cm2 / 179.8inch2 and base area of the Emotiva Airmotiv T3+ is approximately 1373.8cm2 / 212.9inch2. The Airmotiv XT3 requires 16% less surface area than the Airmotiv T3+ which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Emotiva Airmotiv XT3 weighs 41.30kg / 90.9lbs and the Emotiva Airmotiv T3+ weighs 38.60kg / 84.9lbs. This makes the Airmotiv XT3 7% heavier than the Airmotiv T3+.
Here is a comparison of how Airmotiv XT3 and Airmotiv T3+'s weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
 Max Input Power |
300 watts
vs
250 watts
|
Handle more power from your amplifier |
 Height |
1240mm
vs
1258mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1160cm2 (315x425mm)
vs
1373cm2 (318x432mm)
|
Takes less floor space |
 Low Frequency Response |
29 Hz
vs
30 Hz
|
Generates deeper bass |
 High Frequency Response |
28k Hz
vs
27k Hz
|
Generates higher frequency |
 Price per pair* |
1899USD
vs
1999USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Emotiva Airmotiv XT3 |
Emotiva Airmotiv T3+ |
| Brand |
Emotiva |
Emotiva |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
Up to 300 watts |
Up to 250 watts |
| Sensitivity |
91 dB |
91 dB |
| Impedance |
4 ohms |
4 ohms |
| Frequency Response |
30 Hz – 27 kHz |
29 Hz – 28 kHz |
Drivers |
|
|
| Woofer Quantity |
3 |
3 |
| Woofer Size |
8" |
8" |
| Woofer Composition |
woven fiber cone |
woven fiber cone |
| Woofer Surround Material |
SBR |
n/a |
| Tweeter Size |
25×32 mm" |
25×32 mm" |
| Tweeter Type |
folded ribbon |
folded ribbon |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
5.25" |
| Crossover Frequency |
300 Hz, 3.1 kHz |
350 Hz and 2800Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1240.0mm (48.8") |
1258.0mm (49.5") |
| Width |
315.0mm (12.4") |
318.0mm (12.5") |
| Depth |
425.0mm (16.7") |
432.0mm (17") |
| Weight |
41.30kg (90.9lbs) |
38.60kg (84.9lbs) |
| Enclosure |
Bass reflex |
Bass reflex |
| Finish |
n/a |
HDF |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |