In this review, we will be comparing two different type of speakers by Emotiva. Emotiva Airmotiv C2+ is a Center Channel speaker whereas the Airmotiv T3+ is a Floor-standing speaker.
Let's have a brief look at the main features
of Emotiva Airmotiv C2+ and Emotiva Airmotiv T3+ first before getting into our more
detailed comparison.
Airmotiv C2+ and Airmotiv T3+ are members of Emotiva's Airmotiv series of speakers. Below you can find the loudspeakers from this series.
Emotiva Airmotiv Series History
What size room are the Emotiva Airmotiv C2+ and Emotiva Airmotiv T3+ speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv C2+ and Emotiva Airmotiv T3+ compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Airmotiv C2+ and Airmotiv T3+ are 3-way speakers.
| Driver |
Emotiva Airmotiv C2+ |
Emotiva Airmotiv T3+ |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
25×32 mm-inch
|
25×32 mm-inch
|
|
Midrange
|
2 x 3-inch |
2 x 5.25-inch |
|
Woofer
|
2 x 6.5-inch
|
3 x 8-inch
|
Airmotiv C2+ features a 25×32 mm" folded ribbon Tweeter , a 3" Midrange and 2 x 6.5" woven fiber cone Woofer with a Crossover frequency at 350 Hz and 3200Hz. On the other hand, the Airmotiv T3+ features a 25×32 mm" folded ribbon Tweeter , a 5.25" Midrange and 3 x 8" woven fiber cone Woofer with a Crossover frequency at 350 Hz and 2800Hz.
Frequency Response
Airmotiv C2+ has a frequency range of 45 Hz – 28 kHz whereas Airmotiv T3+ has a frequency range of 29 Hz – 28 kHz. With a minimum frequency of 29Hz, the Airmotiv T3+ can go significantly deeper on the low side and provide stronger bass compared to the Airmotiv C2+'s min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv C2+ and Airmotiv T3+ have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Airmotiv C2+ sensitivity is rated at 92 dB and the Airmotiv T3+'s is at 91 dB. This 1 dB difference makes the Emotiva Airmotiv C2+ a more sensitive speaker compared to Emotiva Airmotiv T3+, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Airmotiv C2+ and the Airmotiv C2+ can provide this impedance level.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Airmotiv C2+ can handle a max power of 250 watts RMS from the amp the whereas Airmotiv C2+ has a max power handling value of 150 watts RMS , 100 watts less than the Airmotiv T3+.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Airmotiv C2+ and Airmotiv T3+ features dual binding post speaker terminals for bi-amping or bi-wiring.
Emotiva Airmotiv C2+'s Binding post terminals allows Bi-amping or bi-wiring
Emotiva Airmotiv T3+'s Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Airmotiv C2+ and Airmotiv T3+ have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Emotiva Airmotiv C2+ Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv C2+'s and Emotiva Airmotiv T3+'s external dimensions. Emotiva Airmotiv C2+ has external dimensions of 220.0 x 812.0 x 267.0mm ( 8-5/8 x 31-15/16 x 10-1/2inch) whereas Emotiva Airmotiv T3+ has external dimensions of 1258.0 x 318.0 x 432.0mm ( 49-1/2-inch x 12-1/2-inch x 17-inch) .
Emotiva Airmotiv C2+ is 1038mm shorter and 165mm less deeper than Emotiva Airmotiv T3+ but it is also 494mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv C2+ is approximately 2168.0cm2 / 336.0inch2 and base area of the Emotiva Airmotiv T3+ is approximately 1373.8cm2 / 212.9inch2. The Airmotiv C2+ requires 58% more surface area than the Airmotiv T3+ which gives it a small disadvantage on placement in tight spaces.