In this review, we will be comparing IC-D61-W and IC-DT61-W, two Passive In-wall speakers by ELAC
Let's have a brief look at the main features
of ELAC Debut IC-D61-W and ELAC Debut IC-DT61-W first before getting into our more
detailed comparison.
ELAC Debut IC-D61-W Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 6.5" Woven aramid fiber Woofer
- 45-20k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 6ohms
- Power Range:30-120watts
ELAC Debut IC-DT61-W Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 6.5" Woven aramid fiber Woofer
- 45-20k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 6ohms
- Power Range:30-120watts
IC-D61-W and IC-DT61-W are members of ELAC's Debut 2.0 series of speakers. Below you can find the loudspeakers from this series.
ELAC Debut 2.0 Series
History
What size room are the ELAC Debut IC-D61-W and ELAC Debut IC-DT61-W speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ELAC Debut IC-D61-W |
ELAC Debut IC-DT61-W |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the ELAC Debut IC-D61-W and ELAC Debut IC-DT61-W compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both IC-D61-W and IC-DT61-W are 2-way speakers.
| Driver |
ELAC Debut IC-D61-W |
ELAC Debut IC-DT61-W |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
IC-D61-W features a 1" Cloth Soft-Dome Tweeter and 1 x 6.5" Woven aramid fiber Woofer with a Crossover frequency at 2200Hz. On the other hand, the IC-DT61-W features a 1" Cloth Soft-Dome Tweeter and 1 x 6.5" Woven aramid fiber Woofer with a Crossover frequency at 2200Hz.
Frequency Response
IC-D61-W and IC-DT61-W has exactly the same frequency range of 45-20k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
IC-D61-W and IC-DT61-W have the same Impedance of 6 ohms and their sensitivity is also same at 88 dB.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
IC-D61-W and IC-DT61-W has the same power range of 30-120 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
IC-D61-W features Spring clamp type posts and IC-DT61-W has a Spring clamp type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut IC-D61-W's and ELAC Debut IC-DT61-W's external dimensions. ELAC Debut IC-D61-W has external dimensions of ( ) whereas ELAC Debut IC-DT61-W has external dimensions of ( ) .
In this case, we can see that ELAC Debut IC-D61-W and ELAC Debut IC-DT61-W have the exact same height, width and thickness.