In this review, we will be comparing two different type of speakers by Dynaudio. Dynaudio Emit 20 is a Bookshelf speaker whereas the Emit M30 is a Floor-standing speaker.
Let's have a brief look at the main features
of Dynaudio Emit 20 and Dynaudio Emit M30 first before getting into our more
detailed comparison.
Dynaudio Emit 20 Key Specs
- 2-way Design
- 1.1" Soft-Dome Tweeter
- 7" MSP Woofer
- 53-25k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 6ohms
- Weight:10.30kg
- Dimensions (H x W x D): 14-9/16" x 8-1/16" x 12-5/16" ( 370.0 x 205.0 x 312.0mm )
Dynaudio Emit M30 Key Specs
- 2-way Design
- 1.1" Tweeter
- 2 x 6.6875" Magnesium Silicate Polymer Woofer
- 40-23k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Power Range:up to 200watts
- Weight:18.18kg
- Dimensions (H x W x D): 37-13/16" x 8-1/16" x 11-5/8" ( 961.0 x 205.0 x 296.0mm )
Emit 20 and Emit M30 are members of Dynaudio's Emit series of speakers. Below you can find the loudspeakers from this series.
Dynaudio Emit Series
History
What size room are the Dynaudio Emit 20 and Dynaudio Emit M30 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Dynaudio Emit 20 |
Dynaudio Emit M30 |
| Near-field |
Good |
Bad |
| Small Room |
Good |
Poor |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Good |
| Very Large Room |
No way |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Dynaudio Emit 20 and Dynaudio Emit M30 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Emit 20 and Emit M30 are 2-way speakers.
| Driver |
Dynaudio Emit 20 |
Dynaudio Emit M30 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 7-inch
|
2 x 6.6875-inch
|
Emit 20 features a 1.1" Cerotar Soft-Dome Tweeter and 1 x 7" MSP Woofer with a Crossover frequency at 3800 Hz. On the other hand, the Emit M30 features a 1.1" Tweeter and 2 x 6.6875" Magnesium Silicate Polymer Woofer .
Frequency Response
Emit 20 has a frequency range of 53-25k Hz whereas Emit M30 has a frequency range of 40-23k Hz. With a minimum frequency of 40Hz, the Emit M30 can go significantly deeper on the low side and provide stronger bass compared to the Emit 20's min frequency of 53Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Emit 20 is a 6 ohms speaker compared to the Emit M30 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Emit M30 can provide this impedance level.
On the other hand, they have the same sensitivity of 86 dBdB.
Sensitivity
Bookshelf Speakers
Input Type and Bi-Amping / Bi-Wiring
Emit 20 features Binding post type posts and Emit M30 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Dynaudio Emit M30's Binding post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Dynaudio Emit 20's and Dynaudio Emit M30's external dimensions. Dynaudio Emit 20 has external dimensions of 370.0 x 205.0 x 312.0mm ( 14-9/16 x 8-1/16 x 12-5/16inch) whereas Dynaudio Emit M30 has external dimensions of 961.0 x 205.0 x 296.0mm ( 37-13/16 x 8-1/16 x 11-5/8inch) .
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Dynaudio Emit 20 is approximately 639.6cm2 / 99.1inch2 and base area of the Dynaudio Emit M30 is approximately 606.8cm2 / 94.1inch2. The Emit 20 requires 5% more surface area than the Emit M30 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Dynaudio Emit M30?
Here are the items that come with the Emit M30:
- Floorstanding loudspeaker
- Grille
- Foam port plug
- 4 Spike feet
- 4 Hex nuts
- 4 Protective discs
- Owners Manual
- Quick Start Guide
- Warranty Extension Card