In this review, we will be comparing two different type of speakers by DALI. DALI Opticon LCR MK2 is a On-Wall speaker whereas the Opticon 2 MK2 is a Bookshelf speaker.
Let's have a brief look at the main features
of DALI Opticon LCR II and DALI Opticon 2 II first before getting into our more
detailed comparison.
DALI Opticon LCR II Key Specs
- 3-way Design
- 17 x 45 mm ribbon + 1.125" Soft-dome + ribbon Hybrid Tweeter
- 6.5" Wood Fiber Woofer
- 70-30k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-150watts
- Weight:8.00kg
- Dimensions (H x W x D): 483.0" x 11-1/4" x 5"( 483.0 x 286.0 x 127.0mm )
DALI Opticon 2 II Key Specs
- 2-way Design
- 1.125" Soft-Dome Tweeter
- 6.5" Wood Fiber Woofer
- 59-25k Hz Frequency Response
- 86.5 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-150watts
- Weight:7.73kg
- Dimensions (H x W x D): 351.0" x 7-11/16" x 11-11/16"( 351.0 x 196.0 x 297.0mm )
Opticon LCR MK2 and Opticon 2 MK2 are members of DALI's Opticon Mark II series of speakers. Below you can find the loudspeakers from this series.
DALI Opticon Mark II Series
History
What size room are the DALI Opticon LCR II and DALI Opticon 2 II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
DALI Opticon LCR II |
DALI Opticon 2 II |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the DALI Opticon LCR II and DALI Opticon 2 II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Opticon LCR MK2 is a 3-way design whereas the Opticon 2 MK2 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
DALI Opticon LCR II |
DALI Opticon 2 II |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
17 x 45 mm ribbon + 1.125-inch
|
1.125-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Opticon LCR MK2 features a 17 x 45 mm ribbon + 1.125" Soft-dome + ribbon Hybrid Tweeter and 1 x 6.5" Wood Fiber Woofer with a Crossover frequency at 2800Hz and 14.000Hz. On the other hand, the Opticon 2 MK2 features a 1.125" Soft-Dome Tweeter and 1 x 6.5" Wood Fiber Woofer with a Crossover frequency at 2000Hz.
Frequency Response
Opticon LCR MK2 has a frequency range of 70-30k Hz whereas Opticon 2 MK2 has a frequency range of 59-25k Hz. With a minimum frequency of 59Hz, the Opticon 2 MK2 can go significantly deeper on the low side and provide stronger bass compared to the Opticon LCR MK2's min frequency of 70Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the On-Wall class in our database.
Low Frequency
On-Wall Speakers
High Frequency
On-Wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Opticon LCR MK2 and Opticon 2 MK2 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Opticon LCR MK2 sensitivity is rated at 89 dB and the Opticon 2 MK2's is at 86.5 dB. This 2 dB difference makes the DALI Opticon LCR II a more sensitive speaker compared to DALI Opticon 2 II, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Opticon LCR MK2 and the Opticon LCR MK2 can provide this impedance level.
Sensitivity
On-Wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Opticon LCR MK2 and Opticon 2 MK2 has the same power range of 30-150 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Opticon LCR MK2 features Post type posts and Opticon 2 MK2 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
DALI Opticon LCR II's Post terminals
DALI Opticon 2 II's Post terminals
Cabinet Type and Port Position
Both Opticon LCR MK2 and Opticon 2 MK2 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
DALI Opticon 2 II Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare DALI Opticon LCR II's and DALI Opticon 2 II's external dimensions. DALI Opticon LCR II has external dimensions of 483.0 x 286.0 x 127.0mm ( 19 x 11-1/4 x 5inch) whereas DALI Opticon 2 II has external dimensions of 351.0 x 196.0 x 297.0mm ( 13-13/16 x 7-11/16 x 11-11/16inch) .
DALI Opticon 2 II is 90mm narrower and 132mm shorter than DALI Opticon LCR II but it is also 170mm deeper.
Below you can see the front view size comparison of DALI Opticon LCR II and DALI Opticon 2 II in scale.
Comparison image of DALI Opticon LCR II and DALI Opticon 2 II Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the DALI Opticon LCR II is approximately 363.2cm2 / 56.3inch2 and base area of the DALI Opticon 2 II is approximately 582.1cm2 / 90.2inch2. The Opticon LCR MK2 requires 38% less surface area than the Opticon 2 MK2 which gives it a small advantage on placement in tight spaces.
What's in the Box of DALI Opticon LCR II?
Here are the items that are included inside the box of Opticon LCR MK2:
LCR loudspeakerGrille4 Rubber bumpersHex-keyQuick Start GuideCongratulations Card
What's in the Box of DALI Opticon 2 II?
Here are the items that come with the Opticon 2 MK2:
Bookshelf loudspeakerGrille4 Rubber feetQuick Start GuideCongratulations Card