In this review, we will be comparing A200 and A10, two Powered Bookshelf speakers by Buchardt Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them.
Let's have a brief look at the main features
of Buchardt A200 and Buchardt A10 first before getting into our more
detailed comparison.
Buchardt A200 Key Specs
- 2-way Design
- 200-watt RMS Integrated Amplifier
- 0.74" aluminum waveguide Tweeter
- 2 x 5" Long stroke paper cone Woofer
- 25-22k Hz Frequency Response
- 24-bit Max Depth / 192kHz Max Sample Rate
- Weight:6.75kg
- Dimensions (H x W x D): 315.0" x 6.29" x 8.66"( 315 x 160 x 220 mm )
Buchardt A10 Key Specs
- 2-way Design
- 200-watt RMS Integrated Amplifier
- 0.74" Dome with waveguide Tweeter
- 6.5" paper Woofer
- 28-40k Hz Frequency Response
- 24-bit Max Depth / 192kHZ Max Sample Rate
- Weight:6.80kg
- Dimensions (H x W x D): 370.0" x 7" x 9.65"( 370 x 180.0 x 245.0mm )
A200 and A10 are members of Buchardt's Active series of speakers. Below you can find the loudspeakers from this series.
In the following sections, we will get into more detail in order to better understand how the Buchardt A200 and Buchardt A10 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both A200 and A10 are 2-way speakers.
| Driver |
Buchardt A200 |
Buchardt A10 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.74-inch
|
0.74-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5-inch
|
1 x 6.5-inch
|
A200 features a 0.74" Resonance-free aluminum dome with CDC waveguide aluminum waveguide Tweeter and 2 x 5" Long stroke paper cone Woofer with a Crossover frequency at 250Hz and 3100Hz. On the other hand, the A10 features a 0.74" Aluminum Dome with waveguide Tweeter and 1 x 6.5" paper Woofer with a Crossover frequency at 2800Hz.
Frequency Response
A200 has a frequency range of 25-22k Hz whereas A10 has a frequency range of 28-40k Hz. With a minimum frequency of 25Hz, the A200 can go slightly deeper then the A10's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt A200's and Buchardt A10's external dimensions. Buchardt A200 has external dimensions of 315 x 160 x 220 mm ( 12.4 x 6.29 x 8.66 inch) whereas Buchardt A10 has external dimensions of 370 x 180.0 x 245.0mm ( 14.6 x 7 x 11inch) .
Buchardt A10 is clearly the larger of the two speakers. Its body is 20mm wider, 55mm taller and 25mm deeper than Buchardt A200.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Buchardt A200 is approximately 352.0cm2 / 54.6inch2 and base area of the Buchardt A10 is approximately 441.0cm2 / 68.4inch2. The A200 requires 20% less surface area than the A10 which gives it a small advantage on placement in tight spaces.