In this review, we will be comparing CWM664 and CWM652, two Passive In-wall speakers by Bowers Wilkins Let's have a brief look at the main features
of B&W CWM664 and B&W CWM652 first before getting into our more
detailed comparison.
B&W CWM664 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 6" Glass-fiber Woofer
- 45-35kHz Frequency Response
- 87.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-130watts
- Dimensions (H x W x D): 280.0" x 7.2500" x 3.7500"( 280.0 x 185.0 x 96.0mm )
B&W CWM652 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 5" Kevlar Woofer
- 54-50kHz Frequency Response
- 86 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-100watts
- Dimensions (H x W x D): 229.0" x 6.0000" x 3.7500"( 229.0 x 153.0 x 96.0mm )
What size room are the B&W CWM664 and B&W CWM652 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
B&W CWM664 |
B&W CWM652 |
| Near-field |
Poor |
Average |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the B&W CWM664 and B&W CWM652 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both CWM664 and CWM652 are 2-way speakers.
| Driver |
B&W CWM664 |
B&W CWM652 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6-inch
|
1 x 5-inch
|
CWM664 features a 1" Soft-Dome Tweeter and 1 x 6" Glass-fiber Woofer . On the other hand, the CWM652 features a 1" Soft-Dome Tweeter and 1 x 5" Kevlar Woofer .
Frequency Response
CWM664 has a frequency range of 45-35kHz whereas CWM652 has a frequency range of 54-50kHz. With a minimum frequency of 45Hz, the CWM664 can go significantly deeper on the low side and provide stronger bass compared to the CWM652's min frequency of 54Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
CWM664 and CWM652 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. CWM664 sensitivity is rated at 87.5 dB and the CWM652's is at 86 dB. This 2 dB difference makes the B&W CWM664 a more sensitive speaker compared to B&W CWM652, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
CWM664 can handle a max power of 130 watts RMS from the amp the whereas CWM652 has a max power handling value of 100 watts RMS, 30 watts less than the CWM664.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
CWM664 features Spring post type posts and CWM652 has a Spring post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W CWM664's and B&W CWM652's external dimensions. B&W CWM664 has external dimensions of 280.0 x 185.0 x 96.0mm ( 11.0000-inch x 7.2500-inch x 3.7500-inch) whereas B&W CWM652 has external dimensions of 229.0 x 153.0 x 96.0mm ( 9.0000-inch x 6.0000-inch x 3.7500-inch) .
B&W CWM652 is 32mm narrower and 51mm shorter than B&W CWM664 but they have the same thickness of 96.0mm.
What's in the Box of B&W CWM664?
Here are the items that are included inside the box of CWM664:
2 In-wall loudspeakers2 Mounting frames2 Grilles2 Paint mask2 Cut-out templatesQuick Start GuideTemplateWarranty Information
What's in the Box of B&W CWM652?
Here are the items that come with the CWM652:
2 In-wall loudspeakers2 Mounting frames2 Grilles2 Paint mask2 Cut-out templatesQuick Start GuideTemplateWarranty Information
Max Input Power 
Sensitivity 
Woofer Size 
High Frequency Response 
Height 
Base Surface Area