In this review, we will be comparing CWM663 and 100 IW LCR5, two Passive In-wall speakers from Bowers Wilkins and Focal. Let's have a brief look at the main features
of B&W CWM663 and Focal 100 IW LCR5 first before getting into our more
detailed comparison.
B&W CWM663 Key Specs
- 2-way Design
- 1" Soft-Dome Tweeter
- 6" Kevlar Woofer
- 45-50kHz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-150watts
- Dimensions (H x W x D): 280.0" x 7.2500" x 3.7500"( 280.0 x 185.0 x 96.0mm )
Focal 100 IW LCR5 Key Specs
- 2-way Design
- 1" Inverted Hard-Dome Tweeter
- 2 x 5.125" Polyglass Woofer
- 55-23kHz Frequency Response
- 90.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:25-120watts
- Dimensions (H x W x D): 415.0" x 5.8130" x 3.2500"( 415.0 x 148.0 x 83.0mm )
What size room are the B&W CWM663 and Focal 100 IW LCR5 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
B&W CWM663 |
Focal 100 IW LCR5 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the B&W CWM663 and Focal 100 IW LCR5 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both CWM663 and 100 IW LCR5 are 2-way speakers.
| Driver |
B&W CWM663 |
Focal 100 IW LCR5 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6-inch
|
2 x 5.125-inch
|
CWM663 features a 1" Soft-Dome Tweeter and 1 x 6" Kevlar Woofer . On the other hand, the 100 IW LCR5 features a 1" Inverted Hard-Dome Tweeter and 2 x 5.125" Polyglass Woofer .
Frequency Response
CWM663 has a frequency range of 45-50kHz whereas 100 IW LCR5 has a frequency range of 55-23kHz. With a minimum frequency of 45Hz, the CWM663 can go significantly deeper on the low side and provide stronger bass compared to the 100 IW LCR5's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
CWM663 and 100 IW LCR5 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. CWM663 sensitivity is rated at 88 dB and the 100 IW LCR5's is at 90.5 dB. This 3 dB difference makes the Focal 100 IW LCR5 a more sensitive speaker compared to B&W CWM663, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
CWM663 can handle a max power of 150 watts RMS from the amp the whereas 100 IW LCR5 has a max power handling value of 120 watts RMS, 30 watts less than the CWM663.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
CWM663 features Spring post type posts and 100 IW LCR5 has a Spring post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W CWM663's and Focal 100 IW LCR5's external dimensions. B&W CWM663 has external dimensions of 280.0 x 185.0 x 96.0mm ( 11.0000-inch x 7.2500-inch x 3.7500-inch) whereas Focal 100 IW LCR5 has external dimensions of 415.0 x 148.0 x 83.0mm ( 16.3130-inch x 5.8130-inch x 3.2500-inch) .
Focal 100 IW LCR5 is 37mm narrower and 13mm less deeper than B&W CWM663 but it is also 135mm taller.
What's in the Box of B&W CWM663?
Here are the items that are included inside the box of CWM663:
2 In-wall loudspeakers2 Mounting frames2 Grilles2 Paint mask2 Cut-out templatesQuick Start GuideTemplateWarranty Information
What's in the Box of Focal 100 IW LCR5?
Here are the items that come with the 100 IW LCR5:
One in-wall speaker1 metal-mesh grill (white)Cut-out templateUser manual
Max Input Power 
Woofer Size 
High Frequency Response 
Height 
Sensitivity 
Base Surface Area 
Price per pair*