In this review, we will be comparing NS-SW100 and ASW608, two Powered Subwoofer speakers from Yamaha and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Yamaha NS-SW100 and B&W ASW608 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Yamaha NS-SW100and B&W ASW608 have a single woofer setup however the Yamaha NS-SW100's woofer is 10-inch whereas the B&W ASW608 features a 8-inch woofer.
Frequency Response
NS-SW100 has a frequency range of 25-180 Hz whereas ASW608 has a frequency range of 32-140 Hz. With a minimum frequency of 25Hz, the NS-SW100 can go significantly deeper on the low side and provide stronger bass compared to the ASW608's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Yamaha NS-SW100 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W ASW608 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Yamaha NS-SW100's and B&W ASW608's external dimensions. Yamaha NS-SW100 has external dimensions of 352.4 x 352.4 x 409.6mm (13.875 x 13.875 x 16.125inch) whereas B&W ASW608 has external dimensions of 272.0 x 261.0 x 350.0mm (10-11/16 x 10-1/4 x 13-3/4inch).
Yamaha NS-SW100 is clearly the larger of the two speakers. Its body is 91.4mm wider, 80.4mm taller and 59.6mm deeper than B&W ASW608.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Yamaha NS-SW100 is approximately 1443.4cm2 / 223.7inch2 and base area of the B&W ASW608 is approximately 913.5cm2 / 141.6inch2. The NS-SW100 requires 58% more surface area than the ASW608 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Yamaha NS-SW100 weighs 12.02kg / 26.4lbs and the B&W ASW608 weighs 8.86kg / 19.5lbs. This makes the NS-SW100 36% heavier than the ASW608.
Here is a comparison of how NS-SW100 and ASW608's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
25 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
180k Hz
vs
140k Hz
|
Generates higher frequency |
 Price per pair* |
270USD
vs
599USD
|
costs less (*prices may change depending on the seller, location and time) |
 Height |
272mm
vs
352mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
913cm2
vs
1443cm2
|
Takes less floor space |
| General |
Yamaha NS-SW100 |
Bowers & Wilkins ASW608 |
| Brand |
Yamaha |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
50 watts |
200 watts |
| Frequency Response |
25-180 Hz |
32-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
50-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
100-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
8" |
| Woofer Composition |
Cone |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
352.4mm (13.9") |
272.0mm (10.7") |
| Width |
352.4mm (13.9") |
261.0mm (10.3") |
| Depth |
409.6mm (16.1") |
350.0mm (13.8") |
| Weight |
12.02kg (26.4lbs) |
8.86kg (19.5lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |