In this review, we will be comparing WH S8E and ASW610, two Powered Subwoofer speakers from Wharfedale and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Wharfedale WH-S8E and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Wharfedale WH-S8Eand B&W ASW610 have a single woofer setup however the Wharfedale WH-S8E's woofer is 8-inch whereas the B&W ASW610 features a 10-inch woofer.
Frequency Response
WH S8E has a frequency range of 40-200 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 27Hz, the ASW610 can go significantly deeper on the low side and provide stronger bass compared to the WH S8E's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Wharfedale WH-S8E has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W ASW610 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale WH-S8E's and B&W ASW610's external dimensions. Wharfedale WH-S8E has external dimensions of 330.0 x 268.0 x 327.0mm (13 x 10-9/16 x 12-7/8inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
Wharfedale WH-S8E is 44mm narrower and 67mm less deeper than B&W ASW610 but it is also 9mm taller.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
B&W ASW610 needs about 40% more floor or shelf area. B&W ASW610 is 67mm deeper, so it stands that much further out from the wall.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale WH-S8E is approximately 876.4cm2 / 135.8inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The WH S8E requires 29% less surface area than the ASW610 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Wharfedale WH-S8E weighs 8.20kg / 18lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the ASW610 53% heavier than the WH S8E.
Here is a comparison of how WH S8E and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
200 Hz
vs
140 Hz
|
Generates higher frequency |
 Base Surface Area |
876cm2
vs
1229cm2
|
Takes less floor space |
 Price per pair* |
399USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
27 Hz
vs
40 Hz
|
Generates deeper bass |
 Height |
321mm
vs
330mm
|
Easier to fit in smaller spaces |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
B&W ASW610 needs about 40% more floor area. B&W ASW610 stands 67mm further into the room.
| General |
Wharfedale WH-S8E |
Bowers & Wilkins ASW610 |
| Brand |
Wharfedale |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
70 watts |
200 watts |
| Frequency Response |
40-200 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
70-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
150-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
10" |
| Woofer Composition |
Paper composite |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
330.0mm (13") |
321.0mm (12.6") |
| Width |
268.0mm (10.6") |
312.0mm (12.3") |
| Depth |
327.0mm (12.9") |
394.0mm (15.5") |
| Weight |
8.20kg (18lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |
A ported subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | B&W ASW610 goes deeper - 27Hz against 40Hz. A real difference, though most music has little content below 40Hz. |
| Amplifier power | B | B&W ASW610 has the bigger amplifier - 200W against 70W RMS, about 4.6dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | B&W ASW610 moves more air: 10" against 8" is 1.56x the cone area, not the 1.25x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Wharfedale WH-S8E is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; B&W ASW610 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | Wharfedale WH-S8E is about 27% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Wharfedale WH-S8E carries 5 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Wharfedale WH-S8E costs less - $399 against $899, about 56% less. |
A Wharfedale WH-S8E B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: B&W ASW610 measures better, Wharfedale WH-S8E costs about 56% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, Wharfedale WH-S8E will hit harder for the money; if it is mainly for music in a normal-sized room, B&W ASW610 is usually the easier one to make sound right. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $399 each, two Wharfedale WH-S8E cost about $798 against $899 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.