In this review, we will be comparing WH S10E and Monitor XT12, two Powered Subwoofer speakers from Wharfedale and Polk Audio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Wharfedale WH-S10E and Polk Monitor XT12 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Wharfedale WH-S10E and Polk Monitor XT12 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Wharfedale WH-S10Eand Polk Monitor XT12 have a single woofer setup however the Wharfedale WH-S10E's woofer is 10-inch whereas the Polk Monitor XT12 features a 12-inch woofer.
Frequency Response
WH S10E has a frequency range of 35-120 Hz whereas Monitor XT12 has a frequency range of 24-160 Hz. With a minimum frequency of 24Hz, the Monitor XT12 can go significantly deeper on the low side and provide stronger bass compared to the WH S10E's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Wharfedale WH-S10E has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Polk Monitor XT12 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale WH-S10E's and Polk Monitor XT12's external dimensions. Wharfedale WH-S10E has external dimensions of 394.0 x 333.0 x 397.0mm ( 15-1/2 x 13-1/8 x 15-5/8inch) whereas Polk Monitor XT12 has external dimensions of 418.0 x 408.0 x 485.0mm ( 16-7/16inch x 16-1/16inch x 19-1/16inch ) .
Polk Monitor XT12 is clearly the larger of the two speakers. Its body is 75mm wider, 24mm taller and 88mm deeper than Wharfedale WH-S10E.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale WH-S10E is approximately 1322.0cm2 / 204.9inch2 and base area of the Polk Monitor XT12 is approximately 1978.8cm2 / 306.7inch2. The WH S10E requires 33% less surface area than the Monitor XT12 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Wharfedale WH-S10E weighs 14.40kg / 31.7lbs and the Polk Monitor XT12 weighs 17.73kg / 39lbs. This makes the Monitor XT12 23% heavier than the WH S10E.
Here is a comparison of how WH S10E and Monitor XT12's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Height |
394mm
vs
418mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1322cm2
vs
1978cm2
|
Takes less floor space |
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
24 Hz
vs
35 Hz
|
Generates deeper bass |
 High Frequency Response |
160k Hz
vs
120k Hz
|
Generates higher frequency |
| General |
Wharfedale WH-S10E |
Polk Monitor XT12 |
| Brand |
Wharfedale |
Polk Audio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
50 watts |
| Frequency Response |
35-120 Hz |
24-160 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
50-watt RMS |
| Watts Peak (Max) |
300-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Paper composite |
Bi-laminate paper |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
394.0mm (15.5") |
418.0mm (16.5") |
| Width |
333.0mm (13.1") |
408.0mm (16.1") |
| Depth |
397.0mm (15.6") |
485.0mm (19.1") |
| Weight |
14.40kg (31.7lbs) |
17.73kg (39lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
3 Years |
| Labor Warranty |
5 Years |
3 Years |