In this review, we will be comparing Thetis 300 and DB4S, two Powered Subwoofer speakers from Triangle and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Triangle Thetis 300 and B&W DB4S first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Triangle Thetis 300and B&W DB4S have a single woofer setup however the Triangle Thetis 300's woofer is 8-inch whereas the B&W DB4S features a 10-inch woofer.
Frequency Response
Thetis 300 has a frequency range of 32-120 Hz whereas DB4S has a frequency range of 10-350 Hz. With a minimum frequency of 10Hz, the DB4S can go significantly deeper on the low side and provide stronger bass compared to the Thetis 300's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Triangle Thetis 300 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W DB4S have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Triangle Thetis 300's and B&W DB4S's external dimensions. Triangle Thetis 300 has external dimensions of 340.0 x 300.0 x 300.0mm (13-3/8 x 11-13/16 x 11-13/16inch) whereas B&W DB4S has external dimensions of 375.0 x 362.0 x 434.0mm (14-3/4 x 14-1/4 x 17-1/16inch).
B&W DB4S is clearly the larger of the two speakers. Its body is 62mm wider, 35mm taller and 134mm deeper than Triangle Thetis 300.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
B&W DB4S needs about 75% more floor or shelf area. B&W DB4S is 134mm deeper, so it stands that much further out from the wall. B&W DB4S is 35mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Triangle Thetis 300 is approximately 900.0cm2 / 139.5inch2 and base area of the B&W DB4S is approximately 1571.1cm2 / 243.5inch2. The Thetis 300 requires 43% less surface area than the DB4S which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Triangle Thetis 300 weighs 10.60kg / 23.3lbs and the B&W DB4S weighs 26.05kg / 57.3lbs. This makes the DB4S 146% heavier than the Thetis 300.
Here is a comparison of how Thetis 300 and DB4S's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Height |
340mm
vs
375mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
900cm2
vs
1571cm2
|
Takes less floor space |
 Price per pair* |
650USD
vs
2199USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
10 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
350 Hz
vs
120 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
B&W DB4S needs about 75% more floor area. B&W DB4S stands 134mm further into the room. B&W DB4S is 35mm taller.
| General |
Triangle Thetis 300 |
Bowers & Wilkins DB4S |
| Brand |
Triangle |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
1000 watts |
| Frequency Response |
32-120 Hz |
10-350 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
n/a |
| Watts Peak (Max) |
250-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
10" |
| Woofer Composition |
Paper composite |
Aerofoil |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
340.0mm (13.4") |
375.0mm (14.8") |
| Width |
300.0mm (11.8") |
362.0mm (14.3") |
| Depth |
300.0mm (11.8") |
434.0mm (17.1") |
| Weight |
10.60kg (23.3lbs) |
26.05kg (57.3lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |
A ported subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | B&W DB4S goes deeper - 10Hz against 32Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | B&W DB4S has the bigger amplifier - 1000W against 150W RMS, about 8.2dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | B&W DB4S moves more air: 10" against 8" is 1.56x the cone area, not the 1.25x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Triangle Thetis 300 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; B&W DB4S is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | A | Triangle Thetis 300 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Driver placement | depends | Triangle Thetis 300 fires down and B&W DB4S fires front. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Cabinet size | depends | Triangle Thetis 300 is about 48% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Triangle Thetis 300 carries 5 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Triangle Thetis 300 costs less - $650 against $2,199, about 70% less. |
A Triangle Thetis 300 B B&W DB4S
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
B&W DB4S is ahead, but on only 1 of the measured areas, and it costs about 3.4x the price. Triangle Thetis 300 is the sensible buy unless your room is large enough to need the extra. Films or music? If this is mainly a home cinema, Triangle Thetis 300 will hit harder for the money; if it is mainly for music in a normal-sized room, B&W DB4S is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, Triangle Thetis 300 is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.