In this review, we will be comparing Gravis II and R-100SW, two Powered Subwoofer speakers from Sonus Faber and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Sonus faber Gravis II and Klipsch R-100SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Sonus faber Gravis II and Klipsch R-100SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Sonus faber Gravis IIand Klipsch R-100SW have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Gravis II has a frequency range of 25-120 Hz whereas R-100SW has a frequency range of 32-120 Hz. With a minimum frequency of 25Hz, the Gravis II can go significantly deeper on the low side and provide stronger bass compared to the R-100SW's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Sonus faber Gravis II has a Passive Radiator type cabinet. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs. On the other hand the Klipsch R-100SW have Bass reflex type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Gravis II's and Klipsch R-100SW's external dimensions. Sonus faber Gravis II has external dimensions of 407.0 x 358.0 x 435.0mm ( 16inch x 14-1/16inch x 17-1/8inch ) whereas Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm ( 14-5/8 x 12-9/16 x 18-1/16inch) .
Klipsch R-100SW is 38mm narrower and 35mm shorter than Sonus faber Gravis II but it is also 24mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Gravis II is approximately 1557.3cm2 / 241.4inch2 and base area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2. The Gravis II requires 6% more surface area than the R-100SW which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Sonus faber Gravis II weighs 21.50kg / 47.3lbs and the Klipsch R-100SW weighs 10.91kg / 24lbs. This makes the Gravis II 97% heavier than the R-100SW.
Here is a comparison of how Gravis II and R-100SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Sonus faber Gravis II?
Here are the items that are included inside the box of Gravis II:
Powered subwooferGrille6-feet AC power cord33-feet Speakon cableOwners ManualEnvironmental Information
What's in the Box of Klipsch R-100SW?
Here are the items that come with the R-100SW:
Powered subGrille (installed)6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
 Low Frequency Response |
25 Hz
vs
32 Hz
|
Generates deeper bass |
 Passive Radiator |
2 x 10-inch
vs
None
|
Increases the bass performance |
 Driver Setup |
1-way
vs
-way
|
Have a dedicated mid-range driver |
 Height |
372mm
vs
407mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1468cm2 (320x459mm)
vs
1557cm2 (358x435mm)
|
Takes less floor space |
 Price per pair* |
275USD
vs
1499USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Sonus faber Gravis II |
Klipsch R-100SW |
| Brand |
Sonus Faber |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
350 watts |
150 watts |
| Frequency Response |
25-120 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
350-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
n/a |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Treated Paper |
Copper-spun IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
407.0mm (16") |
372.0mm (14.6") |
| Width |
358.0mm (14.1") |
320.0mm (12.6") |
| Depth |
435.0mm (17.1") |
459.0mm (18.1") |
| Weight |
21.50kg (47.3lbs) |
10.91kg (24lbs) |
| Enclosure |
Passive Radiator |
Bass reflex |
| Available Colors |
Piano Black,Matte White |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Yr/3 Yr registered |
2 Years |
| Labor Warranty |
2 Yr/3 Yr registered |
2 Years |