In this review, we will be comparing PB-3000 and ASW610, two Powered Subwoofer speakers from SVS and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-3000 and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PB-3000and B&W ASW610 have a single woofer setup however the SVS PB-3000's woofer is 13-inch whereas the B&W ASW610 features a 10-inch woofer.
Frequency Response
PB-3000 has a frequency range of 16-200 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 16Hz, the PB-3000 can go significantly deeper on the low side and provide stronger bass compared to the ASW610's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS PB-3000 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W ASW610 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-3000's and B&W ASW610's external dimensions. SVS PB-3000 has external dimensions of 558.0 x 466.0 x 661.0mm (21-15/16 x 18-5/16 x 26inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
SVS PB-3000 is clearly the larger of the two speakers. Its body is 154mm wider, 237mm taller and 267mm deeper than B&W ASW610.
Below you can see the front view size comparison of SVS PB-3000 and B&W ASW610 in scale.
Comparison image of SVS PB-3000 and B&W ASW610 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-3000 is approximately 3080.3cm2 / 477.4inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The PB-3000 requires 151% more surface area than the ASW610 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PB-3000 weighs 37.36kg / 82.2lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the PB-3000 198% heavier than the ASW610.
Here is a comparison of how PB-3000 and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS PB-3000?
Here are the items that are included inside the box of PB-3000:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- Quick Start Guide
- Online Registration Card
- SVS brochure
What's in the Box of B&W ASW610?
Here are the items that come with the ASW610:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 Woofer Size |
13 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
16 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
140k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
321mm
vs
558mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1229cm2
vs
3080cm2
|
Takes less floor space |
 Price per pair* |
899USD
vs
1600USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
SVS PB-3000 |
Bowers & Wilkins ASW610 |
| Brand |
SVS |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
800 watts |
200 watts |
| Frequency Response |
16-200 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
800-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
2500-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
13" |
10" |
| Woofer Composition |
Aluminum |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
558.0mm (22") |
321.0mm (12.6") |
| Width |
466.0mm (18.3") |
312.0mm (12.3") |
| Depth |
661.0mm (26") |
394.0mm (15.5") |
| Weight |
37.36kg (82.2lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |