In this review, we will be comparing PB-2000 Pro and SPL-100, two Powered Subwoofer speakers from SVS and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-2000 Pro and Klipsch SPL-100 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the SVS PB-2000 Pro and Klipsch SPL-100 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PB-2000 Proand Klipsch SPL-100 have a single woofer setup however the SVS PB-2000 Pro's woofer is 12-inch whereas the Klipsch SPL-100 features a 10-inch woofer.
Frequency Response
PB-2000 Pro has a frequency range of 16-290 Hz whereas SPL-100 has a frequency range of 27-125 Hz. With a minimum frequency of 16Hz, the PB-2000 Pro can go significantly deeper on the low side and provide stronger bass compared to the SPL-100's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both SVS PB-2000 Pro and Klipsch SPL-100 have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-2000 Pro's and Klipsch SPL-100's external dimensions. SVS PB-2000 Pro has external dimensions of 534.0 x 442.0 x 609.0mm ( 21 x 17-3/8 x 23-15/16inch) whereas Klipsch SPL-100 has external dimensions of 418.0 x 358.0 x 478.0mm ( 16-7/16 x 14-1/16 x 18-13/16inch) .
SVS PB-2000 Pro is clearly the larger of the two speakers. Its body is 84mm wider, 116mm taller and 131mm deeper than Klipsch SPL-100.
Below you can see the front view size comparison of SVS PB-2000 Pro and Klipsch SPL-100 in scale.
Comparison image of SVS PB-2000 Pro and Klipsch SPL-100 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-2000 Pro is approximately 2691.8cm2 / 417.2inch2 and base area of the Klipsch SPL-100 is approximately 1711.2cm2 / 265.2inch2. The PB-2000 Pro requires 57% more surface area than the SPL-100 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PB-2000 Pro weighs 29.45kg / 64.8lbs and the Klipsch SPL-100 weighs 16.82kg / 37lbs. This makes the PB-2000 Pro 75% heavier than the SPL-100.
Here is a comparison of how PB-2000 Pro and SPL-100's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS PB-2000 Pro?
Here are the items that are included inside the box of PB-2000 Pro:
Powered subwooferGrille8-feet AC power cordQuick Start GuideSafety InstructionsSVS brochure
What's in the Box of Klipsch SPL-100?
Here are the items that come with the SPL-100:
Powered subGrille6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
16 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
290k Hz
vs
125k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
418mm
vs
534mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1711cm2
vs
2691cm2
|
Takes less floor space |
 Price per pair* |
399USD
vs
1100USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
SVS PB-2000 Pro |
Klipsch SPL-100 |
| Brand |
SVS |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
550 watts |
200 watts |
| Frequency Response |
16-290 Hz |
27-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
550-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
1500-watt RMS |
450-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Aluminum |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
534.0mm (21") |
418.0mm (16.5") |
| Width |
442.0mm (17.4") |
358.0mm (14.1") |
| Depth |
609.0mm (24") |
478.0mm (18.8") |
| Weight |
29.45kg (64.8lbs) |
16.82kg (37lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |