In this review, we will be comparing PB-1000 and SPL-120, two Powered Subwoofer speakers from SVS and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-1000 and Klipsch SPL-120 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PB-1000and Klipsch SPL-120 have a single woofer setup however the SVS PB-1000's woofer is 10-inch whereas the Klipsch SPL-120 features a 12-inch woofer.
Frequency Response
PB-1000 has a frequency range of 19-270 Hz whereas SPL-120 has a frequency range of 24-125 Hz. With a minimum frequency of 19Hz, the PB-1000 can go significantly deeper on the low side and provide stronger bass compared to the SPL-120's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both SVS PB-1000 and Klipsch SPL-120 have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-1000's and Klipsch SPL-120's external dimensions. SVS PB-1000 has external dimensions of 480.0 x 381.0 x 532.0mm (18-7/8 x 15 x 20-15/16inch) whereas Klipsch SPL-120 has external dimensions of 450.0 x 375.0 x 540.0mm (17-11/16 x 14-3/4 x 21-1/4inch).
Klipsch SPL-120 is 6mm narrower and 30mm shorter than SVS PB-1000 but it is also 8mm deeper.
Below you can see the front view size comparison of SVS PB-1000 and Klipsch SPL-120 in scale.
Comparison image of SVS PB-1000 and Klipsch SPL-120 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-1000 is approximately 2026.9cm2 / 314.2inch2 and base area of the Klipsch SPL-120 is approximately 2025.0cm2 / 313.9inch2. The PB-1000 requires 0% more surface area than the SPL-120 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PB-1000 weighs 20.91kg / 46lbs and the Klipsch SPL-120 weighs 20.45kg / 45lbs. This makes the PB-1000 2% heavier than the SPL-120.
Here is a comparison of how PB-1000 and SPL-120's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS PB-1000?
Here are the items that are included inside the box of PB-1000:
- Powered subwoofer
- Grille (installed)
- 6-feet AC power cord
- Owners Manual
- Important Safety Instructions
What's in the Box of Klipsch SPL-120?
Here are the items that come with the SPL-120:
- Powered sub
- Grille
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
 Low Frequency Response |
19 Hz
vs
24 Hz
|
Generates deeper bass |
 High Frequency Response |
270 Hz
vs
125 Hz
|
Generates higher frequency |
| Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 Height |
450mm
vs
480mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
2025cm2
vs
2026cm2
|
Takes less floor space |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Near-identical footprints. SVS PB-1000 is 30mm taller.
| General |
SVS PB-1000 |
Klipsch SPL-120 |
| Brand |
SVS |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
300 watts |
| Frequency Response |
19-270 Hz |
24-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
n/a |
600-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Fiber-composite |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
50-160 Hz and 80 Hz |
n/a |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
480.0mm (18.9") |
450.0mm (17.7") |
| Width |
381.0mm (15") |
375.0mm (14.8") |
| Depth |
532.0mm (20.9") |
540.0mm (21.3") |
| Weight |
20.91kg (46lbs) |
20.45kg (45lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | A | SVS PB-1000 goes deeper - 19Hz against 24Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | evenly matched | Much the same amplifier (300W vs 300W RMS) - under 1dB apart. |
| Driver area | B | Klipsch SPL-120 moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are ported designs, so they roll off in much the same way. |
| Speaker-level inputs | A | SVS PB-1000 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only Klipsch SPL-120 offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Warranty | A | SVS PB-1000 carries 5 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | evenly matched | Priced within a few per cent of each other. |
A SVS PB-1000 B Klipsch SPL-120
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
SVS PB-1000 has the edge on paper, though not by much. The "depends" rows are more likely to decide this than the score is. Check your amplifier first: if it has no subwoofer or preamp output, SVS PB-1000 is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.