In this review, we will be comparing PB-1000 Pro and DB4S, two Powered Subwoofer speakers from SVS and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-1000 Pro and B&W DB4S first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PB-1000 Proand B&W DB4S have a single woofer setup however the SVS PB-1000 Pro's woofer is 12-inch whereas the B&W DB4S features a 10-inch woofer.
Frequency Response
PB-1000 Pro has a frequency range of 17-260 Hz whereas DB4S has a frequency range of 10-350 Hz. With a minimum frequency of 10Hz, the DB4S can go significantly deeper on the low side and provide stronger bass compared to the PB-1000 Pro's min frequency of 17Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS PB-1000 Pro has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W DB4S have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-1000 Pro's and B&W DB4S's external dimensions. SVS PB-1000 Pro has external dimensions of 479.0 x 380.0 x 509.0mm (18-13/16inch x 15inch x 20-15/16inch) whereas B&W DB4S has external dimensions of 375.0 x 362.0 x 434.0mm (14-3/4 x 14-1/4 x 17-1/16inch).
SVS PB-1000 Pro is clearly the larger of the two speakers. Its body is 18mm wider, 104mm taller and 75mm deeper than B&W DB4S.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
SVS PB-1000 Pro needs about 23% more floor or shelf area. SVS PB-1000 Pro is 75mm deeper, so it stands that much further out from the wall. SVS PB-1000 Pro is 104mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-1000 Pro is approximately 1934.2cm2 / 299.8inch2 and base area of the B&W DB4S is approximately 1571.1cm2 / 243.5inch2. The PB-1000 Pro requires 23% more surface area than the DB4S which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PB-1000 Pro weighs 19.30kg / 42.5lbs and the B&W DB4S weighs 26.05kg / 57.3lbs. This makes the DB4S 35% heavier than the PB-1000 Pro.
Here is a comparison of how PB-1000 Pro and DB4S's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS PB-1000 Pro?
Here are the items that are included inside the box of PB-1000 Pro:
- Powered subwoofer
- Grille
- 6-feet AC power cord
- Quick Start Guide
- Brochure
- SVS Support Information
What's in the Box of B&W DB4S?
Here are the items that come with the DB4S:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Decoupling feet
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Cleaning cloth
- Quickstart Guide
- Bowers & Wilkins brochure
- Warranty Information
- Cleaning cloth instructions
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 Price per pair* |
799USD
vs
2199USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Low Frequency Response |
10 Hz
vs
17 Hz
|
Generates deeper bass |
 High Frequency Response |
350 Hz
vs
260 Hz
|
Generates higher frequency |
 Height |
375mm
vs
479mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1571cm2
vs
1934cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
SVS PB-1000 Pro needs about 23% more floor area. SVS PB-1000 Pro stands 75mm further into the room. SVS PB-1000 Pro is 104mm taller.
| General |
SVS PB-1000 Pro |
Bowers & Wilkins DB4S |
| Brand |
SVS |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
325 watts |
1000 watts |
| Frequency Response |
17-260 Hz |
10-350 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
325-watt RMS |
n/a |
| Watts Peak (Max) |
820-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Fiber-composite |
Aerofoil |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
479.0mm (18.9") |
375.0mm (14.8") |
| Width |
380.0mm (15") |
362.0mm (14.3") |
| Depth |
509.0mm (20") |
434.0mm (17.1") |
| Weight |
19.30kg (42.5lbs) |
26.05kg (57.3lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Available Colors |
Black |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |
A ported subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | B&W DB4S goes deeper - 10Hz against 17Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | B&W DB4S has the bigger amplifier - 1000W against 325W RMS, about 4.9dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | SVS PB-1000 Pro moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | SVS PB-1000 Pro is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; B&W DB4S is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Setup and tuning | evenly matched | The same tuning tools on both (app control). |
| Speaker-level inputs | A | SVS PB-1000 Pro takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only SVS PB-1000 Pro offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | B&W DB4S is about 36% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | SVS PB-1000 Pro carries 5 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | SVS PB-1000 Pro costs less - $799 against $2,199, about 64% less. |
A SVS PB-1000 Pro B B&W DB4S
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
SVS PB-1000 Pro has the edge on paper, though not by much. The "depends" rows are more likely to decide this than the score is. Films or music? If this is mainly a home cinema, SVS PB-1000 Pro will hit harder for the money; if it is mainly for music in a normal-sized room, B&W DB4S is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, SVS PB-1000 Pro is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.