In this review, we will be comparing Performa3 B110v2 and R-100SW, two Powered Subwoofer speakers from Revel and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Revel Performa3 B110v2 and Klipsch R-100SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Revel Performa3 B110v2 and Klipsch R-100SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Revel Performa3 B110v2and Klipsch R-100SW have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Performa3 B110v2 has a frequency range of 34-150 Hz whereas R-100SW has a frequency range of 32-120 Hz. With a minimum frequency of 32Hz, the R-100SW can go slightly deeper then the Performa3 B110v2's min frequency of 34Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Revel Performa3 B110v2 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch R-100SW have Bass reflex type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel Performa3 B110v2's and Klipsch R-100SW's external dimensions. Revel Performa3 B110v2 has external dimensions of 429.0 x 364.0 x 393.0mm ( 16-7/8inch x 14-5/16inch x 15-7/16inch ) whereas Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm ( 14-5/8 x 12-9/16 x 18-1/16inch) .
Klipsch R-100SW is 44mm narrower and 57mm shorter than Revel Performa3 B110v2 but it is also 66mm deeper.
Below you can see the front view size comparison of Revel Performa3 B110v2 and Klipsch R-100SW in scale.
Comparison image of Revel Performa3 B110v2 and Klipsch R-100SW Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel Performa3 B110v2 is approximately 1430.5cm2 / 221.7inch2 and base area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2. The Performa3 B110v2 requires 3% less surface area than the R-100SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Revel Performa3 B110v2 weighs 24.45kg / 53.8lbs and the Klipsch R-100SW weighs 10.91kg / 24lbs. This makes the Performa3 B110v2 124% heavier than the R-100SW.
Here is a comparison of how Performa3 B110v2 and R-100SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Revel Performa3 B110v2?
Here are the items that are included inside the box of Performa3 B110v2:
Powered subwoofer6-feet AC power cordGrille4 Spike feetOwners Manual
What's in the Box of Klipsch R-100SW?
Here are the items that come with the R-100SW:
Powered subGrille (installed)6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
 High Frequency Response |
150k Hz
vs
120k Hz
|
Generates higher frequency |
 Base Surface Area |
1430cm2 (364x393mm)
vs
1468cm2 (320x459mm)
|
Takes less floor space |
 Low Frequency Response |
32 Hz
vs
34 Hz
|
Generates deeper bass |
 Height |
372mm
vs
429mm
|
Easier to fit in smaller spaces |
 Price per pair* |
275USD
vs
1925USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Revel Performa3 B110v2 |
Klipsch R-100SW |
| Brand |
Revel |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1000 watts |
150 watts |
| Frequency Response |
34-150 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1000-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
n/a |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Coated Paper/Pulp |
Copper-spun IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
429.0mm (16.9") |
372.0mm (14.6") |
| Width |
364.0mm (14.3") |
320.0mm (12.6") |
| Depth |
393.0mm (15.5") |
459.0mm (18.1") |
| Weight |
24.45kg (53.8lbs) |
10.91kg (24lbs) |
| Enclosure |
Acoustic Suspension |
Bass reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |