In this review, we will be comparing Classic 98 and DB4S, two Powered Subwoofer speakers from REL and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of REL Classic 98 and B&W DB4S first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.REL Classic 98and B&W DB4S have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Classic 98 has a frequency range of 27-120 Hz whereas DB4S has a frequency range of 10-350 Hz. With a minimum frequency of 10Hz, the DB4S can go significantly deeper on the low side and provide stronger bass compared to the Classic 98's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare REL Classic 98's and B&W DB4S's external dimensions. REL Classic 98 has external dimensions of 476.3 x 350.8 x 352.4mm () whereas B&W DB4S has external dimensions of 375.0 x 362.0 x 434.0mm (14-3/4 x 14-1/4 x 17-1/16inch).
REL Classic 98 is 11.2mm narrower and 81.6mm less deeper than B&W DB4S but it is also 101.3mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the REL Classic 98 is approximately 1236.2cm2 / 191.6inch2 and base area of the B&W DB4S is approximately 1571.1cm2 / 243.5inch2. The Classic 98 requires 21% less surface area than the DB4S which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The REL Classic 98 weighs 22.36kg / 49.2lbs and the B&W DB4S weighs 26.05kg / 57.3lbs. This makes the DB4S 17% heavier than the Classic 98.
Here is a comparison of how Classic 98 and DB4S's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Base Surface Area |
1236cm2
vs
1571cm2
|
Takes less floor space |
 Price per pair* |
1499USD
vs
2199USD
|
costs less (*prices may change depending on the seller, location and time) |
 Low Frequency Response |
10 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
350 Hz
vs
120 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
375mm
vs
476mm
|
Easier to fit in smaller spaces |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
B&W DB4S needs about 27% more floor area. B&W DB4S stands 82mm further into the room. REL Classic 98 is 101mm taller.
| General |
REL Classic 98 |
Bowers & Wilkins DB4S |
| Brand |
REL |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
27-120 Hz |
10-350 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
|
Aerofoil |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
476.3mm (18.8") |
375.0mm (14.8") |
| Width |
350.8mm (13.8") |
362.0mm (14.3") |
| Depth |
352.4mm (13.9") |
434.0mm (17.1") |
| Weight |
22.36kg (49.2lbs) |
26.05kg (57.3lbs) |
| Enclosure |
|
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
2 Years |
| Labor Warranty |
3 Years |
2 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | B | B&W DB4S goes deeper - 10Hz against 27Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | B&W DB4S has the bigger amplifier - 1000W against 300W RMS, about 5.2dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | evenly matched | Near-identical radiating area (10" against 10"). |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Warranty | A | REL Classic 98 carries 3 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | REL Classic 98 costs less - $1,499 against $2,199, about 32% less. |
A REL Classic 98 B B&W DB4S
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
B&W DB4S is ahead, but on only 1 of the measured areas, and it costs about 47% more. REL Classic 98 is the sensible buy unless your room is large enough to need the extra.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.