In this review, we will be comparing 3060S and SPL-100, two Powered Subwoofer speakers from Q Acoustics and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Q Acoustics 3060S and Klipsch SPL-100 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Q Acoustics 3060S and Klipsch SPL-100 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Q Acoustics 3060Sand Klipsch SPL-100 have a single woofer setup however the Q Acoustics 3060S's woofer is 8-inch whereas the Klipsch SPL-100 features a 10-inch woofer.
Frequency Response
3060S has a frequency range of 35-250 Hz whereas SPL-100 has a frequency range of 27-125 Hz. With a minimum frequency of 27Hz, the SPL-100 can go significantly deeper on the low side and provide stronger bass compared to the 3060S's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Q Acoustics 3060S has a Infinite Baffle type cabinet. On the other hand the Klipsch SPL-100 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics 3060S's and Klipsch SPL-100's external dimensions. Q Acoustics 3060S has external dimensions of 324.0 x 480.0 x 155.0mm ( 12-3/4 x 18-7/8 x 6-1/8inch) whereas Klipsch SPL-100 has external dimensions of 418.0 x 358.0 x 478.0mm ( 16-7/16 x 14-1/16 x 18-13/16inch) .
Q Acoustics 3060S is 94mm shorter and 323mm less deeper than Klipsch SPL-100 but it is also 122mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics 3060S is approximately 744.0cm2 / 115.3inch2 and base area of the Klipsch SPL-100 is approximately 1711.2cm2 / 265.2inch2. The 3060S requires 57% less surface area than the SPL-100 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Q Acoustics 3060S weighs 8.50kg / 18.7lbs and the Klipsch SPL-100 weighs 16.82kg / 37lbs. This makes the SPL-100 98% heavier than the 3060S.
Here is a comparison of how 3060S and SPL-100's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
250k Hz
vs
125k Hz
|
Generates higher frequency |
 Height |
324mm
vs
418mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
744cm2
vs
1711cm2
|
Takes less floor space |
 Price per pair* |
299USD
vs
399USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
27 Hz
vs
35 Hz
|
Generates deeper bass |
| General |
Q Acoustics 3060S |
Klipsch SPL-100 |
| Brand |
Q Acoustics |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
200 watts |
| Frequency Response |
35-250 Hz |
27-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
n/a |
450-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
10" |
| Woofer Composition |
Paper composite |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
324.0mm (12.8") |
418.0mm (16.5") |
| Width |
480.0mm (18.9") |
358.0mm (14.1") |
| Depth |
155.0mm (6.1") |
478.0mm (18.8") |
| Weight |
8.50kg (18.7lbs) |
16.82kg (37lbs) |
| Enclosure |
Infinite Baffle |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |