In this review, we will be comparing Elite ES8 and DB4S, two Powered Subwoofer speakers from Polk Audio and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk Signature Elite ES8 and B&W DB4S first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Polk Signature Elite ES8 and B&W DB4S compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Polk Signature Elite ES8and B&W DB4S have a single woofer setup however the Polk Signature Elite ES8's woofer is 8-inch whereas the B&W DB4S features a 10-inch woofer.
Frequency Response
Elite ES8 has a frequency range of 32-180 Hz whereas DB4S has a frequency range of 10-350 Hz. With a minimum frequency of 10Hz, the DB4S can go significantly deeper on the low side and provide stronger bass compared to the Elite ES8's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Polk Signature Elite ES8 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W DB4S have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Polk Signature Elite ES8 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk Signature Elite ES8's and B&W DB4S's external dimensions. Polk Signature Elite ES8 has external dimensions of 385.0 x 326.0 x 437.0mm ( 15-1/8inch x 12-13/16inch x 17-3/16inch ) whereas B&W DB4S has external dimensions of 375.0 x 362.0 x 434.0mm ( 14-3/4 x 14-1/4 x 17-1/16inch) .
B&W DB4S is 10mm shorter and 3mm less deeper than Polk Signature Elite ES8 but it is also 36mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk Signature Elite ES8 is approximately 1424.6cm2 / 220.8inch2 and base area of the B&W DB4S is approximately 1571.1cm2 / 243.5inch2. The Elite ES8 requires 9% less surface area than the DB4S which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Polk Signature Elite ES8 weighs 17.73kg / 39lbs and the B&W DB4S weighs 26.05kg / 57.3lbs. This makes the DB4S 47% heavier than the Elite ES8.
Here is a comparison of how Elite ES8 and DB4S's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Polk Signature Elite ES8?
Here are the items that are included inside the box of Elite ES8:
Powered subwooferGrille6-feet AC power cordOwners ManualOnline Product Registration sheet
What's in the Box of B&W DB4S?
Here are the items that come with the DB4S:
Powered subwooferGrille6.5-feet AC power cord4 Decoupling feet4 Rubber feet4 Spike feet4 Lock-nutsCleaning clothQuickstart GuideBowers & Wilkins brochureWarranty InformationCleaning cloth instructions
 Base Surface Area |
1424cm2 (326x437mm)
vs
1571cm2 (362x434mm)
|
Takes less floor space |
 Price per pair* |
449USD
vs
2199USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
10 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
350k Hz
vs
180k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
375mm
vs
385mm
|
Easier to fit in smaller spaces |
| General |
Polk Signature Elite ES8 |
Bowers & Wilkins DB4S |
| Brand |
Polk Audio |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
100 watts |
1000 watts |
| Frequency Response |
32-180 Hz |
10-350 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
100-watt RMS |
0-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
10" |
| Woofer Composition |
Mineral-filled polypropylene |
Aerofoil |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
385.0mm (15.2") |
375.0mm (14.8") |
| Width |
326.0mm (12.8") |
362.0mm (14.3") |
| Depth |
437.0mm (17.2") |
434.0mm (17.1") |
| Weight |
17.73kg (39lbs) |
26.05kg (57.3lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
2 Years |
| Labor Warranty |
3 Years |
2 Years |