In this review, we will be comparing Monitor XT12 and SPL-100, two Powered Subwoofer speakers from Polk Audio and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk Monitor XT12 and Klipsch SPL-100 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Polk Monitor XT12and Klipsch SPL-100 have a single woofer setup however the Polk Monitor XT12's woofer is 12-inch whereas the Klipsch SPL-100 features a 10-inch woofer.
Frequency Response
Monitor XT12 has a frequency range of 24-160 Hz whereas SPL-100 has a frequency range of 27-125 Hz. With a minimum frequency of 24Hz, the Monitor XT12 can go slightly deeper then the SPL-100's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Polk Monitor XT12 and Klipsch SPL-100 have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk Monitor XT12's and Klipsch SPL-100's external dimensions. Polk Monitor XT12 has external dimensions of 418.0 x 408.0 x 485.0mm (16-7/16inch x 16-1/16inch x 19-1/16inch) whereas Klipsch SPL-100 has external dimensions of 418.0 x 358.0 x 478.0mm (16-7/16 x 14-1/16 x 18-13/16inch).
Below you can see the front view size comparison of Polk Monitor XT12 and Klipsch SPL-100 in scale.
Comparison image of Polk Monitor XT12 and Klipsch SPL-100 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk Monitor XT12 is approximately 1978.8cm2 / 306.7inch2 and base area of the Klipsch SPL-100 is approximately 1711.2cm2 / 265.2inch2. The Monitor XT12 requires 16% more surface area than the SPL-100 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Polk Monitor XT12 weighs 17.73kg / 39lbs and the Klipsch SPL-100 weighs 16.82kg / 37lbs. This makes the Monitor XT12 5% heavier than the SPL-100.
Here is a comparison of how Monitor XT12 and SPL-100's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Polk Monitor XT12?
Here are the items that are included inside the box of Monitor XT12:
- Black powered subwoofer
- 6.5-feet AC power cord
- Grille
- Owners Manual
- Online registration card
What's in the Box of Klipsch SPL-100?
Here are the items that come with the SPL-100:
- Powered sub
- Grille
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
24 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
160k Hz
vs
125k Hz
|
Generates higher frequency |
 Base Surface Area |
1711cm2
vs
1978cm2
|
Takes less floor space |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
Polk Monitor XT12 |
Klipsch SPL-100 |
| Brand |
Polk Audio |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
50 watts |
200 watts |
| Frequency Response |
24-160 Hz |
27-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
50-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
n/a |
450-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Bi-laminate paper |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
418.0mm (16.5") |
418.0mm (16.5") |
| Width |
408.0mm (16.1") |
358.0mm (14.1") |
| Depth |
485.0mm (19.1") |
478.0mm (18.8") |
| Weight |
17.73kg (39lbs) |
16.82kg (37lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
2 Years |
| Labor Warranty |
3 Years |
2 Years |