In this review, we will be comparing HTS 12 and DB4S, two Powered Subwoofer speakers from Polk Audio and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk HTS 12 and B&W DB4S first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Polk HTS 12and B&W DB4S have a single woofer setup however the Polk HTS 12's woofer is 12-inch whereas the B&W DB4S features a 10-inch woofer.
Frequency Response
HTS 12 has a frequency range of 28-120 Hz whereas DB4S has a frequency range of 10-350 Hz. With a minimum frequency of 10Hz, the DB4S can go significantly deeper on the low side and provide stronger bass compared to the HTS 12's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Polk HTS 12 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the B&W DB4S have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Polk HTS 12 Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk HTS 12's and B&W DB4S's external dimensions. Polk HTS 12 has external dimensions of 478.0 x 437.0 x 510.0mm (18-13/16 x 17-3/16 x 20-1/16inch) whereas B&W DB4S has external dimensions of 375.0 x 362.0 x 434.0mm (14-3/4 x 14-1/4 x 17-1/16inch).
Polk HTS 12 is clearly the larger of the two speakers. Its body is 75mm wider, 103mm taller and 76mm deeper than B&W DB4S.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk HTS 12 is approximately 2228.7cm2 / 345.4inch2 and base area of the B&W DB4S is approximately 1571.1cm2 / 243.5inch2. The HTS 12 requires 42% more surface area than the DB4S which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Polk HTS 12 weighs 22.68kg / 49.9lbs and the B&W DB4S weighs 26.05kg / 57.3lbs. This makes the DB4S 15% heavier than the HTS 12.
Here is a comparison of how HTS 12 and DB4S's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Polk HTS 12?
Here are the items that are included inside the box of HTS 12:
- Powered subwoofer
- Grille
- 8-feet AC power cord
- Owners Manual
- Online Product Registration sheet
What's in the Box of B&W DB4S?
Here are the items that come with the DB4S:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Decoupling feet
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Cleaning cloth
- Quickstart Guide
- Bowers & Wilkins brochure
- Warranty Information
- Cleaning cloth instructions
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 Price per pair* |
549USD
vs
2199USD
|
costs less (*prices may change depending on the seller, location and time) |
| Low Frequency Response |
10 Hz
vs
28 Hz
|
Generates deeper bass |
 High Frequency Response |
350 Hz
vs
120 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
375mm
vs
478mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1571cm2
vs
2228cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Polk HTS 12 needs about 42% more floor area. Polk HTS 12 stands 76mm further into the room. Polk HTS 12 is 103mm taller.
| General |
Polk Audio HTS 12 |
Bowers & Wilkins DB4S |
| Brand |
Polk Audio |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
1000 watts |
| Frequency Response |
28-120 Hz |
10-350 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
n/a |
| Watts Peak (Max) |
400-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Polypropylene |
Aerofoil |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
478.0mm (18.8") |
375.0mm (14.8") |
| Width |
437.0mm (17.2") |
362.0mm (14.3") |
| Depth |
510.0mm (20.1") |
434.0mm (17.1") |
| Weight |
22.68kg (49.9lbs) |
26.05kg (57.3lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
2 Years |
| Labor Warranty |
3 Years |
2 Years |
A ported subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | B&W DB4S goes deeper - 10Hz against 28Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | B&W DB4S has the bigger amplifier - 1000W against 200W RMS, about 7dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | Polk HTS 12 moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Polk HTS 12 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; B&W DB4S is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | B&W DB4S is about 45% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Polk HTS 12 carries 3 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Polk HTS 12 costs less - $549 against $2,199, about 75% less. |
A Polk HTS 12 B B&W DB4S
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let your room size and where the box can actually stand settle it. Films or music? If this is mainly a home cinema, Polk HTS 12 will hit harder for the money; if it is mainly for music in a normal-sized room, B&W DB4S is usually the easier one to make sound right. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $549 each, two Polk HTS 12 cost about $1,098 against $2,199 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.