In this review, we will be comparing D12s and SPL-100, two Powered Subwoofer speakers from Perlisten and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Perlisten D12s and Klipsch SPL-100 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Perlisten D12s and Klipsch SPL-100 have a totally different setup: the Perlisten D12s features x -inch drivers whereas the SPL-100 features 1 x 10-inch drivers.
Frequency Response
D12s has a frequency range of 20-289 Hz whereas SPL-100 has a frequency range of 27-125 Hz. With a minimum frequency of 20Hz, the D12s can go significantly deeper on the low side and provide stronger bass compared to the SPL-100's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Perlisten D12s and Klipsch SPL-100 have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Perlisten D12s's and Klipsch SPL-100's external dimensions. Perlisten D12s has external dimensions of 448.1 x 420.1 x 450.1mm (17.64 x 16.54 x 17.72inch) whereas Klipsch SPL-100 has external dimensions of 418.0 x 358.0 x 478.0mm (16-7/16 x 14-1/16 x 18-13/16inch).
Klipsch SPL-100 is 62.1mm narrower and 30.1mm shorter than Perlisten D12s but it is also 27.9mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Perlisten D12s is approximately 1890.9cm2 / 293.1inch2 and base area of the Klipsch SPL-100 is approximately 1711.2cm2 / 265.2inch2. The D12s requires 11% more surface area than the SPL-100 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Perlisten D12s weighs 41.00kg / 90.2lbs and the Klipsch SPL-100 weighs 16.82kg / 37lbs. This makes the D12s 144% heavier than the SPL-100.
Here is a comparison of how D12s and SPL-100's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Low Frequency Response |
20 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
289k Hz
vs
125k Hz
|
Generates higher frequency |
| Woofer Size |
10 inches
vs
inches
|
Larger woofer |
 Height |
418mm
vs
448mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1711cm2
vs
1890cm2
|
Takes less floor space |
 Price per pair* |
399USD
vs
5495USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Perlisten D12s |
Klipsch SPL-100 |
| Brand |
Perlisten |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Sensitivity |
92 dB |
n/a |
| Frequency Response |
20-289 Hz |
27-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
n/a |
200-watt RMS |
| Watts Peak (Max) |
n/a |
450-watt RMS |
Drivers |
|
|
| Woofer Quantity |
|
1 |
| Woofer Size |
" |
10" |
| Woofer Composition |
|
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
448.1mm (17.6") |
418.0mm (16.5") |
| Width |
420.1mm (16.5") |
358.0mm (14.1") |
| Depth |
450.1mm (17.7") |
478.0mm (18.8") |
| Weight |
41.00kg (90.2lbs) |
16.82kg (37lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |