In this review, we will be comparing SubSeries 150 and SPL-100, two Powered Subwoofer speakers from PSB and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of PSB SubSeries 150 and Klipsch SPL-100 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both PSB SubSeries 150and Klipsch SPL-100 have a single woofer setup however the PSB SubSeries 150's woofer is 6.5-inch whereas the Klipsch SPL-100 features a 10-inch woofer.
Frequency Response
SubSeries 150 has a frequency range of 26-150 Hz whereas SPL-100 has a frequency range of 27-125 Hz. With a minimum frequency of 26Hz, the SubSeries 150 can go slightly deeper then the SPL-100's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The PSB SubSeries 150 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch SPL-100 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PSB SubSeries 150's and Klipsch SPL-100's external dimensions. PSB SubSeries 150 has external dimensions of 280.0 x 447.0 x 143.0mm (11 x 17-9/16 x 5-5/8inch) whereas Klipsch SPL-100 has external dimensions of 418.0 x 358.0 x 478.0mm (16-7/16 x 14-1/16 x 18-13/16inch).
PSB SubSeries 150 is 138mm shorter and 335mm less deeper than Klipsch SPL-100 but it is also 89mm wider.
Below you can see the front view size comparison of PSB SubSeries 150 and Klipsch SPL-100 in scale.
Comparison image of PSB SubSeries 150 and Klipsch SPL-100 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PSB SubSeries 150 is approximately 639.2cm2 / 99.1inch2 and base area of the Klipsch SPL-100 is approximately 1711.2cm2 / 265.2inch2. The SubSeries 150 requires 63% less surface area than the SPL-100 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The PSB SubSeries 150 weighs 6.05kg / 13.3lbs and the Klipsch SPL-100 weighs 16.82kg / 37lbs. This makes the SPL-100 178% heavier than the SubSeries 150.
Here is a comparison of how SubSeries 150 and SPL-100's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of PSB SubSeries 150?
Here are the items that are included inside the box of SubSeries 150:
- Powered subwoofer
- 6-feet AC power cord
- 2 Mounting feet
- Wall-mount bracket
- Quick Start Subwoofer Guide
- Limited Warranty sheet
- Important Safety Instructions
What's in the Box of Klipsch SPL-100?
Here are the items that come with the SPL-100:
- Powered sub
- Grille
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
 Low Frequency Response |
26 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
150k Hz
vs
125k Hz
|
Generates higher frequency |
 Height |
280mm
vs
418mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
639cm2
vs
1711cm2
|
Takes less floor space |
| Woofer Size |
10 inches
vs
6.5 inches
|
Larger woofer |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
PSB SubSeries 150 |
Klipsch SPL-100 |
| Brand |
PSB |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
100 watts |
200 watts |
| Frequency Response |
26-150 Hz |
27-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
100-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
n/a |
450-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
10" |
| Woofer Composition |
Polypropylene |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
280.0mm (11") |
418.0mm (16.5") |
| Width |
447.0mm (17.6") |
358.0mm (14.1") |
| Depth |
143.0mm (5.6") |
478.0mm (18.8") |
| Weight |
6.05kg (13.3lbs) |
16.82kg (37lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
2 Years |
| Labor Warranty |
1 Year |
2 Years |