In this review, we will be comparing CW10 and R-100SW, two Powered Subwoofer speakers from Monitor Audio and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Monitor Audio CW10 and Klipsch R-100SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Monitor Audio CW10 and Klipsch R-100SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Monitor Audio CW10and Klipsch R-100SW have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
CW10 has a frequency range of 32-135 Hz whereas R-100SW has a frequency range of 32-120 Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Monitor Audio CW10 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch R-100SW have Bass reflex type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio CW10's and Klipsch R-100SW's external dimensions. Monitor Audio CW10 has external dimensions of 318.0 x 307.0 x 375.0mm ( 12-1/2 x 12-1/16 x 14-3/4inch) whereas Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm ( 14-5/8 x 12-9/16 x 18-1/16inch) .
Klipsch R-100SW is clearly the larger of the two speakers. Its body is 13mm wider, 54mm taller and 84mm deeper than Monitor Audio CW10.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio CW10 is approximately 1151.3cm2 / 178.5inch2 and base area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2. The CW10 requires 22% less surface area than the R-100SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Monitor Audio CW10 weighs 12.61kg / 27.7lbs and the Klipsch R-100SW weighs 10.91kg / 24lbs. This makes the CW10 16% heavier than the R-100SW.
Here is a comparison of how CW10 and R-100SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Monitor Audio CW10?
Here are the items that are included inside the box of CW10:
Powered subwooferGrille (pre-installed)4 Rubber feet (pre-installed)6-feet AC power cord10-feet Mono-minijack cableOwners ManualWarranty CardSafety Instructions
What's in the Box of Klipsch R-100SW?
Here are the items that come with the R-100SW:
Powered subGrille (installed)6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
 High Frequency Response |
135k Hz
vs
120k Hz
|
Generates higher frequency |
 Height |
318mm
vs
372mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1151cm2 (307x375mm)
vs
1468cm2 (320x459mm)
|
Takes less floor space |
 Price per pair* |
275USD
vs
1325USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Monitor Audio CW10 |
Klipsch R-100SW |
| Brand |
Monitor Audio |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
150 watts |
| Frequency Response |
32-135 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
n/a |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
C-CAM |
Copper-spun IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
318.0mm (12.5") |
372.0mm (14.6") |
| Width |
307.0mm (12.1") |
320.0mm (12.6") |
| Depth |
375.0mm (14.8") |
459.0mm (18.1") |
| Weight |
12.61kg (27.7lbs) |
10.91kg (24lbs) |
| Enclosure |
Acoustic Suspension |
Bass reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |