In this review, we will be comparing Dynamo 800X and R-100SW, two Powered Subwoofer speakers from MartinLogan and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of MartinLogan 800X and Klipsch R-100SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the MartinLogan 800X and Klipsch R-100SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.MartinLogan 800Xand Klipsch R-100SW have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Dynamo 800X has a frequency range of 24-200 Hz whereas R-100SW has a frequency range of 32-120 Hz. With a minimum frequency of 24Hz, the Dynamo 800X can go significantly deeper on the low side and provide stronger bass compared to the R-100SW's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The MartinLogan 800X has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch R-100SW have Bass reflex type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan 800X's and Klipsch R-100SW's external dimensions. MartinLogan 800X has external dimensions of 351.0 x 318.0 x 350.0mm ( 13-13/16 x 12-1/2 x 13-3/4inch) whereas Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm ( 14-5/8 x 12-9/16 x 18-1/16inch) .
Klipsch R-100SW is clearly the larger of the two speakers. Its body is 2mm wider, 21mm taller and 109mm deeper than MartinLogan 800X.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan 800X is approximately 1113.0cm2 / 172.5inch2 and base area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2. The Dynamo 800X requires 24% less surface area than the R-100SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The MartinLogan 800X weighs 13.64kg / 30lbs and the Klipsch R-100SW weighs 10.91kg / 24lbs. This makes the Dynamo 800X 25% heavier than the R-100SW.
Here is a comparison of how Dynamo 800X and R-100SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of MartinLogan 800X?
Here are the items that are included inside the box of Dynamo 800X:
Powered subwooferGrille6.5-feet AC power cordUser-feets Manual
What's in the Box of Klipsch R-100SW?
Here are the items that come with the R-100SW:
Powered subGrille (installed)6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
 Low Frequency Response |
24 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
120k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
351mm
vs
372mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1113cm2
vs
1468cm2
|
Takes less floor space |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Price per pair* |
275USD
vs
900USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
MartinLogan Dynamo 800X |
Klipsch R-100SW |
| Brand |
MartinLogan |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
150 watts |
| Frequency Response |
24-200 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
n/a |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Polypropylene |
Copper-spun IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front and bottom |
front |
Physical Specs |
|
|
| Height |
351.0mm (13.8") |
372.0mm (14.6") |
| Width |
318.0mm (12.5") |
320.0mm (12.6") |
| Depth |
350.0mm (13.8") |
459.0mm (18.1") |
| Weight |
13.64kg (30lbs) |
10.91kg (24lbs) |
| Enclosure |
Acoustic Suspension |
Bass reflex |
| Available Colors |
Satin Black |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Yrs w/ Registration |
2 Years |
| Labor Warranty |
3 Yrs w/ Registration |
2 Years |