In this review, we will be comparing SPL-100 and Debut 2.0 SUB3030, two Powered Subwoofer speakers from Klipsch and ELAC. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch SPL-100 and ELAC Debut 2.0 SUB3030 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch SPL-100 and ELAC Debut 2.0 SUB3030 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch SPL-100and ELAC Debut 2.0 SUB3030 have a single woofer setup however the Klipsch SPL-100's woofer is 10-inch whereas the ELAC Debut 2.0 SUB3030 features a 12-inch woofer.
Frequency Response
SPL-100 has a frequency range of 27-125 Hz whereas Debut 2.0 SUB3030 has a frequency range of 25-150 Hz. With a minimum frequency of 25Hz, the Debut 2.0 SUB3030 can go slightly deeper then the SPL-100's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch SPL-100 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the ELAC Debut 2.0 SUB3030 have Passive radiator type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch SPL-100's and ELAC Debut 2.0 SUB3030's external dimensions. Klipsch SPL-100 has external dimensions of 418.0 x 358.0 x 478.0mm ( 16-7/16 x 14-1/16 x 18-13/16inch) whereas ELAC Debut 2.0 SUB3030 has external dimensions of 462.0 x 451.0 x 464.0mm ( 18-3/16 x 17-3/4 x 18-1/4inch) .
Klipsch SPL-100 is 93mm narrower and 44mm shorter than ELAC Debut 2.0 SUB3030 but it is also 14mm deeper.
Below you can see the front view size comparison of Klipsch SPL-100 and ELAC Debut 2.0 SUB3030 in scale.
Comparison image of Klipsch SPL-100 and ELAC Debut 2.0 SUB3030 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch SPL-100 is approximately 1711.2cm2 / 265.2inch2 and base area of the ELAC Debut 2.0 SUB3030 is approximately 2092.6cm2 / 324.4inch2. The SPL-100 requires 18% less surface area than the Debut 2.0 SUB3030 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch SPL-100 weighs 16.82kg / 37lbs and the ELAC Debut 2.0 SUB3030 weighs 22.80kg / 50.2lbs. This makes the Debut 2.0 SUB3030 36% heavier than the SPL-100.
Here is a comparison of how SPL-100 and Debut 2.0 SUB3030's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch SPL-100?
Here are the items that are included inside the box of SPL-100:
Powered subGrille6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of ELAC Debut 2.0 SUB3030?
Here are the items that come with the Debut 2.0 SUB3030:
Powered subwoofer9-feet AC power cord4 Spikes4 Hex-nutsOperating Instructions
 Height |
418mm
vs
462mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1711cm2 (358x478mm)
vs
2092cm2 (451x464mm)
|
Takes less floor space |
 Price per pair* |
399USD
vs
900USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
25 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
150k Hz
vs
125k Hz
|
Generates higher frequency |
| General |
Klipsch SPL-100 |
ELAC Debut 2.0 SUB3030 |
| Brand |
Klipsch |
ELAC |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
500 watts |
| Frequency Response |
27-125 Hz |
25-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
500-watt RMS |
| Watts Peak (Max) |
450-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Cerametallic |
Doped Paper |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
418.0mm (16.5") |
462.0mm (18.2") |
| Width |
358.0mm (14.1") |
451.0mm (17.8") |
| Depth |
478.0mm (18.8") |
464.0mm (18.3") |
| Weight |
16.82kg (37lbs) |
22.80kg (50.2lbs) |
| Enclosure |
Bass Reflex |
Passive radiator |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
1 Year |
| Labor Warranty |
2 Years |
1 Year |