In this review, we will be comparing SPL-100 and Debut 2.0 SUB3010, two Powered Subwoofer speakers from Klipsch and ELAC. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch SPL-100 and ELAC Debut 2.0 SUB3010 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch SPL-100and ELAC Debut 2.0 SUB3010 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
SPL-100 has a frequency range of 27-125 Hz whereas Debut 2.0 SUB3010 has a frequency range of 28-150 Hz. With a minimum frequency of 27Hz, the SPL-100 can go slightly deeper then the Debut 2.0 SUB3010's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch SPL-100 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the ELAC Debut 2.0 SUB3010 have Passive radiator type enclosure.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch SPL-100's and ELAC Debut 2.0 SUB3010's external dimensions. Klipsch SPL-100 has external dimensions of 418.0 x 358.0 x 478.0mm (16-7/16 x 14-1/16 x 18-13/16inch) whereas ELAC Debut 2.0 SUB3010 has external dimensions of 374.0 x 355.0 x 383.0mm (14-11/16 x 13-15/16 x 15-1/16inch).
Klipsch SPL-100 is clearly the larger of the two speakers. Its body is 3mm wider, 44mm taller and 95mm deeper than ELAC Debut 2.0 SUB3010.
Below you can see the front view size comparison of Klipsch SPL-100 and ELAC Debut 2.0 SUB3010 in scale.
Comparison image of Klipsch SPL-100 and ELAC Debut 2.0 SUB3010 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch SPL-100 is approximately 1711.2cm2 / 265.2inch2 and base area of the ELAC Debut 2.0 SUB3010 is approximately 1359.7cm2 / 210.8inch2. The SPL-100 requires 26% more surface area than the Debut 2.0 SUB3010 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch SPL-100 weighs 16.82kg / 37lbs and the ELAC Debut 2.0 SUB3010 weighs 14.59kg / 32.1lbs. This makes the SPL-100 15% heavier than the Debut 2.0 SUB3010.
Here is a comparison of how SPL-100 and Debut 2.0 SUB3010's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch SPL-100?
Here are the items that are included inside the box of SPL-100:
- Powered sub
- Grille
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
What's in the Box of ELAC Debut 2.0 SUB3010?
Here are the items that come with the Debut 2.0 SUB3010:
- Powered subwoofer
- 9-feet AC power cord
- 4 Spikes
- 4 Hex-nuts
- Operating Instructions
Low Frequency Response |
27 Hz
vs
28 Hz
|
Generates deeper bass |
Price per pair* |
399USD
vs
650USD
|
costs less (*prices may change depending on the seller, location and time) |
Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
High Frequency Response |
150 Hz
vs
125 Hz
|
Generates higher frequency |
App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
Height |
374mm
vs
418mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1359cm2
vs
1711cm2
|
Takes less floor space |
| General |
Klipsch SPL-100 |
ELAC Debut 2.0 SUB3010 |
| Brand |
Klipsch |
ELAC |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
200 watts |
| Frequency Response |
27-125 Hz |
28-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
450-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Cerametallic |
Doped Paper |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
418.0mm (16.5") |
374.0mm (14.7") |
| Width |
358.0mm (14.1") |
355.0mm (14") |
| Depth |
478.0mm (18.8") |
383.0mm (15.1") |
| Weight |
16.82kg (37lbs) |
14.59kg (32.1lbs) |
| Enclosure |
Bass Reflex |
Passive radiator |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
1 Year |
| Labor Warranty |
2 Years |
1 Year |
A ported subwoofer against a passive radiator one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | evenly matched | Effectively the same reach (27Hz vs 28Hz). |
| Amplifier power | evenly matched | Much the same amplifier (200W vs 200W RMS) - under 1dB apart. |
| Driver area | evenly matched | Near-identical radiating area (10" against 10"). |
| Enclosure | depends | Klipsch SPL-100 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; ELAC Debut 2.0 SUB3010 is passive radiator - a passive radiator behaves like a port without the pipe noise, and suits a slim cabinet. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Wireless option | depends | Only Klipsch SPL-100 offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | ELAC Debut 2.0 SUB3010 is about 29% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Klipsch SPL-100 carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Klipsch SPL-100 costs less - $399 against $650, about 39% less. |
A Klipsch SPL-100 B ELAC Debut 2.0 SUB3010
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Klipsch SPL-100 has the edge on paper, though not by much. The "depends" rows are more likely to decide this than the score is. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $399 each, two Klipsch SPL-100 cost about $798 against $650 for one of the other, which is worth a thought. If placement is the constraint - a corner, behind a sofa, under a desk - ELAC Debut 2.0 SUB3010 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.