In this review, we will be comparing RW-100SW and PB-1000, two Powered Subwoofer speakers from Klipsch and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RW-100SW and SVS PB-1000 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch RW-100SW and SVS PB-1000 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch RW-100SWand SVS PB-1000 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
RW-100SW has a frequency range of 27-125 Hz whereas PB-1000 has a frequency range of 19-270 Hz. With a minimum frequency of 19Hz, the PB-1000 can go significantly deeper on the low side and provide stronger bass compared to the RW-100SW's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch RW-100SW and SVS PB-1000 have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RW-100SW's and SVS PB-1000's external dimensions. Klipsch RW-100SW has external dimensions of 383.0 x 383.0 x 472.0mm ( 15-1/16inch x 15-1/16inch x 18-9/16inch ) whereas SVS PB-1000 has external dimensions of 480.0 x 381.0 x 532.0mm ( 18-7/8 x 15 x 20-15/16inch) .
Klipsch RW-100SW is 97mm shorter and 60mm less deeper than SVS PB-1000 but it is also 2mm wider.
Below you can see the front view size comparison of Klipsch RW-100SW and SVS PB-1000 in scale.
Comparison image of Klipsch RW-100SW and SVS PB-1000 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RW-100SW is approximately 1807.8cm2 / 280.2inch2 and base area of the SVS PB-1000 is approximately 2026.9cm2 / 314.2inch2. The RW-100SW requires 11% less surface area than the PB-1000 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RW-100SW weighs 17.73kg / 39lbs and the SVS PB-1000 weighs 20.91kg / 46lbs. This makes the PB-1000 18% heavier than the RW-100SW.
Here is a comparison of how RW-100SW and PB-1000's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch RW-100SW?
Here are the items that are included inside the box of RW-100SW:
Wireless powered subGrille (installed)5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of SVS PB-1000?
Here are the items that come with the PB-1000:
Powered subwooferGrille (installed)6-feet AC power cordOwners ManualImportant Safety Instructions
 Height |
383mm
vs
480mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1807cm2 (383x472mm)
vs
2026cm2 (381x532mm)
|
Takes less floor space |
 Price per pair* |
350USD
vs
499USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Yes
vs
No
|
Connect your subwoofer to your system wireless |
 Low Frequency Response |
19 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
270k Hz
vs
125k Hz
|
Generates higher frequency |
| General |
Klipsch Reference Wireless RW-100SW |
SVS PB-1000 |
| Brand |
Klipsch |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
225 watts |
300 watts |
| Frequency Response |
27-125 Hz |
19-270 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
225-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Copper-spun IMG |
Fiber-composite |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
50-160 Hz and 80 Hz |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
383.0mm (15.1") |
480.0mm (18.9") |
| Width |
383.0mm (15.1") |
381.0mm (15") |
| Depth |
472.0mm (18.6") |
532.0mm (20.9") |
| Weight |
17.73kg (39lbs) |
20.91kg (46lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
5 Years |
| Labor Warranty |
2 Years |
5 Years |