In this review, we will be comparing R-112SW and R-10SWi, two Powered Subwoofer speakers by Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-112SW and Klipsch R-10SWi first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch R-112SW and Klipsch R-10SWi compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch R-112SWand Klipsch R-10SWi have a single woofer setup however the Klipsch R-112SW's woofer is 12-inch whereas the Klipsch R-10SWi features a 10-inch woofer.
Frequency Response
R-112SW has a frequency range of 24-125 Hz whereas R-10SWi has a frequency range of 32-120 Hz. With a minimum frequency of 24Hz, the R-112SW can go significantly deeper on the low side and provide stronger bass compared to the R-10SWi's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch R-112SW and Klipsch R-10SWi have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Klipsch R-10SWi Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-112SW's and Klipsch R-10SWi's external dimensions. Klipsch R-112SW has external dimensions of 442.0 x 391.0 x 532.0mm ( 17-3/8 x 15-3/8 x 20-15/16inch) whereas Klipsch R-10SWi has external dimensions of 370.0 x 318.0 x 462.0mm ( 14-9/16 x 12-1/2 x 18-3/16inch) .
Klipsch R-112SW is clearly the larger of the two speakers. Its body is 73mm wider, 72mm taller and 70mm deeper than Klipsch R-10SWi.
Below you can see the front view size comparison of Klipsch R-112SW and Klipsch R-10SWi in scale.
Comparison image of Klipsch R-112SW and Klipsch R-10SWi Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-112SW is approximately 2080.1cm2 / 322.4inch2 and base area of the Klipsch R-10SWi is approximately 1469.2cm2 / 227.7inch2. The R-112SW requires 42% more surface area than the R-10SWi which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-112SW weighs 22.16kg / 48.8lbs and the Klipsch R-10SWi weighs 11.59kg / 25.5lbs. This makes the R-112SW 91% heavier than the R-10SWi.
Here is a comparison of how R-112SW and R-10SWi's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-112SW?
Here are the items that are included inside the box of R-112SW:
Powered subwooferGrille8.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch R-10SWi?
Here are the items that come with the R-10SWi:
Powered subWireless transmitter (attached 12
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
24 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
125k Hz
vs
120k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Height |
370mm
vs
442mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1469cm2 (318x462mm)
vs
2080cm2 (391x532mm)
|
Takes less floor space |
 Price per pair* |
274USD
vs
399USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference R-112SW |
Klipsch Reference R-10SWi |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
150 watts |
| Frequency Response |
24-125 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
n/a |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Cerametallic |
Copper IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
442.0mm (17.4") |
370.0mm (14.6") |
| Width |
391.0mm (15.4") |
318.0mm (12.5") |
| Depth |
532.0mm (20.9") |
462.0mm (18.2") |
| Weight |
22.16kg (48.8lbs) |
11.59kg (25.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |