In this review, we will be comparing RP-1400CSW and DB4S, two Powered Subwoofer speakers from Klipsch and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1400CSW and B&W DB4S first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch RP-1400CSWand B&W DB4S have a single woofer setup however the Klipsch RP-1400CSW's woofer is 14-inch whereas the B&W DB4S features a 10-inch woofer.
Frequency Response
RP-1400CSW has a frequency range of 15-180 Hz whereas DB4S has a frequency range of 10-350 Hz. With a minimum frequency of 10Hz, the DB4S can go significantly deeper on the low side and provide stronger bass compared to the RP-1400CSW's min frequency of 15Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch RP-1400CSW and B&W DB4S have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1400CSW's and B&W DB4S's external dimensions. Klipsch RP-1400CSW has external dimensions of 444.0 x 421.6 x 421.6mm (17.48inch x 16.6inch x 16.6inch) whereas B&W DB4S has external dimensions of 375.0 x 362.0 x 434.0mm (14-3/4 x 14-1/4 x 17-1/16inch).
B&W DB4S is 59.6mm narrower and 69mm shorter than Klipsch RP-1400CSW but it is also 12.4mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1400CSW is approximately 1777.5cm2 / 275.5inch2 and base area of the B&W DB4S is approximately 1571.1cm2 / 243.5inch2. The RP-1400CSW requires 13% more surface area than the DB4S which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1400CSW weighs 27.08kg / 59.6lbs and the B&W DB4S weighs 26.05kg / 57.3lbs. This makes the RP-1400CSW 4% heavier than the DB4S.
Here is a comparison of how RP-1400CSW and DB4S's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
14 inches
vs
10 inches
|
Larger woofer |
 Price per pair* |
1100USD
vs
2199USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Low Frequency Response |
10 Hz
vs
15 Hz
|
Generates deeper bass |
 High Frequency Response |
350 Hz
vs
180 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
375mm
vs
444mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1571cm2
vs
1777cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Klipsch RP-1400CSW needs about 13% more floor area. Klipsch RP-1400CSW is 69mm taller.
| General |
Klipsch Reference Premiere RP-1400CSW |
Bowers & Wilkins DB4S |
| Brand |
Klipsch |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
500 watts |
1000 watts |
| Frequency Response |
15-180 Hz |
10-350 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
500-watt RMS |
n/a |
| Watts Peak (Max) |
1000-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
14" |
10" |
| Woofer Composition |
Cerametallic |
Aerofoil |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
444.0mm (17.5") |
375.0mm (14.8") |
| Width |
421.6mm (16.6") |
362.0mm (14.3") |
| Depth |
421.6mm (16.6") |
434.0mm (17.1") |
| Weight |
27.08kg (59.6lbs) |
26.05kg (57.3lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |
Two quite different sizes of subwoofer. Room volume decides this more than anything else on the page: a big driver in a small room is wasted, and a small one in a large room is worked to death.
| Area | Better | Why |
|---|
| Bass depth | B | B&W DB4S goes deeper - 10Hz against 15Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | B&W DB4S has the bigger amplifier - 1000W against 500W RMS, about 3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | Klipsch RP-1400CSW moves more air: 14" against 10" is 1.96x the cone area, not the 1.4x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Wireless option | depends | Only Klipsch RP-1400CSW offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | B&W DB4S is about 25% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | A | Klipsch RP-1400CSW costs less - $1,100 against $2,199, about 50% less. |
A Klipsch RP-1400CSW B B&W DB4S
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
B&W DB4S is ahead, but on only 1 of the measured areas, and it costs about 100% more. Klipsch RP-1400CSW is the sensible buy unless your room is large enough to need the extra. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $1,100 each, two Klipsch RP-1400CSW cost about $2,200 against $2,199 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.