In this review, we will be comparing RP-1200SW and SB-2000 Pro, two Powered Subwoofer speakers from Klipsch and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1200SW and SVS SB-2000 Pro first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch RP-1200SWand SVS SB-2000 Pro have the same driver set up: Both subwoofers have 1 x 12" drivers.
Frequency Response
RP-1200SW has a frequency range of 16.5-138 Hz whereas SB-2000 Pro has a frequency range of 19-240 Hz. With a minimum frequency of 17Hz, the RP-1200SW can go slightly deeper then the SB-2000 Pro's min frequency of 19Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch RP-1200SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the SVS SB-2000 Pro have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1200SW's and SVS SB-2000 Pro's external dimensions. Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm (18-15/16inch x 17inch x 25-15/16inch) whereas SVS SB-2000 Pro has external dimensions of 370.0 x 361.0 x 434.0mm (14-9/16 x 14-3/16 x 17-1/16inch).
Klipsch RP-1200SW is clearly the larger of the two speakers. Its body is 71mm wider, 112mm taller and 225mm deeper than SVS SB-2000 Pro.
Below you can see the front view size comparison of Klipsch RP-1200SW and SVS SB-2000 Pro in scale.
Comparison image of Klipsch RP-1200SW and SVS SB-2000 Pro Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2 and base area of the SVS SB-2000 Pro is approximately 1566.7cm2 / 242.8inch2. The RP-1200SW requires 82% more surface area than the SB-2000 Pro which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1200SW weighs 31.18kg / 68.6lbs and the SVS SB-2000 Pro weighs 17.55kg / 38.6lbs. This makes the RP-1200SW 78% heavier than the SB-2000 Pro.
Here is a comparison of how RP-1200SW and SB-2000 Pro's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Low Frequency Response |
17 Hz
vs
19 Hz
|
Generates deeper bass |
 High Frequency Response |
240k Hz
vs
138k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
370mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1566cm2
vs
2846cm2
|
Takes less floor space |
 Price per pair* |
900USD
vs
999USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference Premiere RP-1200SW |
SVS SB-2000 Pro |
| Brand |
Klipsch |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
550 watts |
| Frequency Response |
16.5-138 Hz |
19-240 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
550-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
1500-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
12" |
| Woofer Composition |
Cerametallic |
Aluminum |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
482.0mm (19") |
370.0mm (14.6") |
| Width |
432.0mm (17") |
361.0mm (14.2") |
| Depth |
659.0mm (25.9") |
434.0mm (17.1") |
| Weight |
31.18kg (68.6lbs) |
17.55kg (38.6lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
5 Years |
| Labor Warranty |
5 years |
5 Years |