In this review, we will be comparing RP-1200SW and PB-3000, two Powered Subwoofer speakers from Klipsch and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1200SW and SVS PB-3000 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch RP-1200SW and SVS PB-3000 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch RP-1200SWand SVS PB-3000 have a single woofer setup however the Klipsch RP-1200SW's woofer is 12-inch whereas the SVS PB-3000 features a 13-inch woofer.
Frequency Response
RP-1200SW has a frequency range of 16.5-138 Hz whereas PB-3000 has a frequency range of 16-200 Hz. With a minimum frequency of 16Hz, the PB-3000 can go slightly deeper then the RP-1200SW's min frequency of 17Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch RP-1200SW and SVS PB-3000 have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1200SW's and SVS PB-3000's external dimensions. Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm ( 18-15/16inch x 17inch x 25-15/16inch ) whereas SVS PB-3000 has external dimensions of 558.0 x 466.0 x 661.0mm ( 21-15/16 x 18-5/16 x 26inch) .
SVS PB-3000 is clearly the larger of the two speakers. Its body is 34mm wider, 76mm taller and 2mm deeper than Klipsch RP-1200SW.
Below you can see the front view size comparison of Klipsch RP-1200SW and SVS PB-3000 in scale.
Comparison image of Klipsch RP-1200SW and SVS PB-3000 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2 and base area of the SVS PB-3000 is approximately 3080.3cm2 / 477.4inch2. The RP-1200SW requires 8% less surface area than the PB-3000 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1200SW weighs 31.18kg / 68.6lbs and the SVS PB-3000 weighs 37.36kg / 82.2lbs. This makes the PB-3000 20% heavier than the RP-1200SW.
Here is a comparison of how RP-1200SW and PB-3000's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Height |
482mm
vs
558mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
2846cm2 (432x659mm)
vs
3080cm2 (466x661mm)
|
Takes less floor space |
 Price per pair* |
999USD
vs
1600USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
13 inches
vs
12 inches
|
Larger woofer |
| Low Frequency Response |
16 Hz
vs
17 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
138k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
| General |
Klipsch Reference Premiere RP-1200SW |
SVS PB-3000 |
| Brand |
Klipsch |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
800 watts |
| Frequency Response |
16.5-138 Hz |
16-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
800-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
2500-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
13" |
| Woofer Composition |
Cerametallic |
Aluminum |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
482.0mm (19") |
558.0mm (22") |
| Width |
432.0mm (17") |
466.0mm (18.3") |
| Depth |
659.0mm (25.9") |
661.0mm (26") |
| Weight |
31.18kg (68.6lbs) |
37.36kg (82.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
5 Years |
| Labor Warranty |
5 years |
5 Years |