In this review, we will be comparing RP-1200SW and Dynamo 1100X, two Powered Subwoofer speakers from Klipsch and MartinLogan. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch RP-1200SW and MartinLogan 1100X first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch RP-1200SWand MartinLogan 1100X have the same driver set up: Both subwoofers have 1 x 12" drivers.
Frequency Response
RP-1200SW has a frequency range of 16.5-138 Hz whereas Dynamo 1100X has a frequency range of 22-200 Hz. With a minimum frequency of 17Hz, the RP-1200SW can go significantly deeper on the low side and provide stronger bass compared to the Dynamo 1100X's min frequency of 22Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch RP-1200SW has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the MartinLogan 1100X have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-1200SW's and MartinLogan 1100X's external dimensions. Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm (18-15/16inch x 17inch x 25-15/16inch) whereas MartinLogan 1100X has external dimensions of 435.0 x 381.0 x 410.0mm (17-1/8 x 15 x 16-1/8inch).
Klipsch RP-1200SW is clearly the larger of the two speakers. Its body is 51mm wider, 47mm taller and 249mm deeper than MartinLogan 1100X.
Below you can see the front view size comparison of Klipsch RP-1200SW and MartinLogan 1100X in scale.
Comparison image of Klipsch RP-1200SW and MartinLogan 1100X Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2 and base area of the MartinLogan 1100X is approximately 1562.1cm2 / 242.1inch2. The RP-1200SW requires 82% more surface area than the Dynamo 1100X which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch RP-1200SW weighs 31.18kg / 68.6lbs and the MartinLogan 1100X weighs 20.91kg / 46lbs. This makes the RP-1200SW 49% heavier than the Dynamo 1100X.
Here is a comparison of how RP-1200SW and Dynamo 1100X's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Low Frequency Response |
17 Hz
vs
22 Hz
|
Generates deeper bass |
 Price per pair* |
1100USD
vs
1500USD
|
costs less (*prices may change depending on the seller, location and time) |
 High Frequency Response |
200 Hz
vs
138 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
435mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1562cm2
vs
2846cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Klipsch RP-1200SW needs about 82% more floor area. Klipsch RP-1200SW stands 249mm further into the room. Klipsch RP-1200SW is 47mm taller.
| General |
Klipsch Reference Premiere RP-1200SW |
MartinLogan Dynamo 1100X |
| Brand |
Klipsch |
MartinLogan |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
400 watts |
650 watts |
| Frequency Response |
16.5-138 Hz |
22-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
400-watt RMS |
650-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
12" |
| Woofer Composition |
Cerametallic |
Polypropylene |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front and bottom |
Physical Specs |
|
|
| Height |
482.0mm (19") |
435.0mm (17.1") |
| Width |
432.0mm (17") |
381.0mm (15") |
| Depth |
659.0mm (25.9") |
410.0mm (16.1") |
| Weight |
31.18kg (68.6lbs) |
20.91kg (46lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Finish |
MDF with Vinyl |
n/a |
| Available Colors |
Ebony |
Satin Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
3 Yrs w/ Registration |
| Labor Warranty |
5 years |
3 Yrs w/ Registration |
A ported subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | A | Klipsch RP-1200SW goes deeper - 17Hz against 22Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | MartinLogan 1100X has the bigger amplifier - 650W against 400W RMS, about 2.1dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | evenly matched | Near-identical radiating area (12" against 12"). |
| Enclosure | depends | Klipsch RP-1200SW is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; MartinLogan 1100X is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | B | MartinLogan 1100X takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Driver placement | depends | Klipsch RP-1200SW fires front and MartinLogan 1100X fires front/down. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Cabinet size | depends | MartinLogan 1100X is about 50% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Klipsch RP-1200SW carries 5 years on parts against 3 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Klipsch RP-1200SW costs less - $1,100 against $1,500, about 27% less. |
A Klipsch RP-1200SW B MartinLogan 1100X
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let your room size and where the box can actually stand settle it. Films or music? If this is mainly a home cinema, Klipsch RP-1200SW will hit harder for the money; if it is mainly for music in a normal-sized room, MartinLogan 1100X is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, MartinLogan 1100X is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.