In this review, we will be comparing R-100SW and Windsor 10, two Powered Subwoofer speakers from Klipsch and KLH. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-100SW and KLH Windsor 10 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch R-100SW and KLH Windsor 10 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch R-100SWand KLH Windsor 10 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
R-100SW has a frequency range of 32-120 Hz whereas Windsor 10 has a frequency range of 32-150 Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch R-100SW has a Bass reflex type cabinet. On the other hand the KLH Windsor 10 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-100SW's and KLH Windsor 10's external dimensions. Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm ( 14-5/8 x 12-9/16 x 18-1/16inch) whereas KLH Windsor 10 has external dimensions of 397.0 x 337.0 x 450.0mm ( 15-5/8 x 13-1/4 x 17-11/16inch) .
Klipsch R-100SW is 17mm narrower and 25mm shorter than KLH Windsor 10 but it is also 9mm deeper.
Below you can see the front view size comparison of Klipsch R-100SW and KLH Windsor 10 in scale.
Comparison image of Klipsch R-100SW and KLH Windsor 10 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2 and base area of the KLH Windsor 10 is approximately 1516.5cm2 / 235.1inch2. The R-100SW requires 3% less surface area than the Windsor 10 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-100SW weighs 10.91kg / 24lbs and the KLH Windsor 10 weighs 14.78kg / 32.5lbs. This makes the Windsor 10 35% heavier than the R-100SW.
Here is a comparison of how R-100SW and Windsor 10's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-100SW?
Here are the items that are included inside the box of R-100SW:
Powered subGrille (installed)6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of KLH Windsor 10?
Here are the items that come with the Windsor 10:
Powered subwooferGrille9-feet AC power cordManual
 Height |
372mm
vs
397mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1468cm2
vs
1516cm2
|
Takes less floor space |
 High Frequency Response |
150k Hz
vs
120k Hz
|
Generates higher frequency |
| General |
Klipsch R-100SW |
KLH Windsor 10 |
| Brand |
Klipsch |
KLH |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
150 watts |
| Frequency Response |
32-120 Hz |
32-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
300-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Copper-spun IMG |
Composite |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
372.0mm (14.6") |
397.0mm (15.6") |
| Width |
320.0mm (12.6") |
337.0mm (13.3") |
| Depth |
459.0mm (18.1") |
450.0mm (17.7") |
| Weight |
10.91kg (24lbs) |
14.78kg (32.5lbs) |
| Enclosure |
Bass reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |