In this review, we will be comparing R-100SW and A100P, two Powered Subwoofer speakers from Klipsch and JBL. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-100SW and JBL Stage A100P first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch R-100SW and JBL Stage A100P compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch R-100SWand JBL Stage A100P have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
R-100SW has a frequency range of 32-120 Hz whereas A100P has a frequency range of 35-150 Hz. With a minimum frequency of 32Hz, the R-100SW can go slightly deeper then the A100P's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch R-100SW and JBL Stage A100P have Bass reflex type cabinets.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-100SW's and JBL Stage A100P's external dimensions. Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm ( 14-5/8 x 12-9/16 x 18-1/16inch) whereas JBL Stage A100P has external dimensions of 359.0 x 337.0 x 435.0mm ( 14-1/8 x 13-1/4 x 17-1/8inch) .
JBL Stage A100P is 13mm shorter and 24mm less deeper than Klipsch R-100SW but it is also 17mm wider.
Below you can see the front view size comparison of Klipsch R-100SW and JBL Stage A100P in scale.
Comparison image of Klipsch R-100SW and JBL Stage A100P Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2 and base area of the JBL Stage A100P is approximately 1466.0cm2 / 227.2inch2. The R-100SW requires 0% more surface area than the A100P which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-100SW weighs 10.91kg / 24lbs and the JBL Stage A100P weighs 13.66kg / 30.1lbs. This makes the A100P 25% heavier than the R-100SW.
Here is a comparison of how R-100SW and A100P's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-100SW?
Here are the items that are included inside the box of R-100SW:
Powered subGrille (installed)6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of JBL Stage A100P?
Here are the items that come with the A100P:
Powered subwooferGrille6-feet AC power cord4 Spike feetOwners ManualWarranty CardImportant Safety Instructions
 Low Frequency Response |
32 Hz
vs
35 Hz
|
Generates deeper bass |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 High Frequency Response |
150k Hz
vs
120k Hz
|
Generates higher frequency |
 Height |
359mm
vs
372mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1466cm2 (337x435mm)
vs
1468cm2 (320x459mm)
|
Takes less floor space |
 Price per pair* |
240USD
vs
275USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch R-100SW |
JBL Stage A100P |
| Brand |
Klipsch |
JBL |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
150 watts |
| Frequency Response |
32-120 Hz |
35-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
300-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Copper-spun IMG |
Polycellulose |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
372.0mm (14.6") |
359.0mm (14.1") |
| Width |
320.0mm (12.6") |
337.0mm (13.3") |
| Depth |
459.0mm (18.1") |
435.0mm (17.1") |
| Weight |
10.91kg (24lbs) |
13.66kg (30.1lbs) |
| Enclosure |
Bass reflex |
Bass reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
1 Year |
| Labor Warranty |
2 Years |
1 Year |