In this review, we will be comparing R-100SW and Muro SUB2010, two Powered Subwoofer speakers from Klipsch and ELAC. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-100SW and ELAC Muro SUB2010 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch R-100SWand ELAC Muro SUB2010 have a single woofer setup however the Klipsch R-100SW's woofer is 10-inch whereas the ELAC Muro SUB2010 features a 8-inch woofer.
Frequency Response
R-100SW has a frequency range of 32-120 Hz whereas Muro SUB2010 has a frequency range of 38-150 Hz. With a minimum frequency of 32Hz, the R-100SW can go significantly deeper on the low side and provide stronger bass compared to the Muro SUB2010's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch R-100SW has a Bass reflex type cabinet. On the other hand the ELAC Muro SUB2010 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-100SW's and ELAC Muro SUB2010's external dimensions. Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm (14-5/8 x 12-9/16 x 18-1/16inch) whereas ELAC Muro SUB2010 has external dimensions of 388.0 x 135.0 x 405.0mm (15-1/4 x 5-5/16 x 15-15/16inch).
ELAC Muro SUB2010 is 185mm narrower and 54mm less deeper than Klipsch R-100SW but it is also 16mm taller.
Below you can see the front view size comparison of Klipsch R-100SW and ELAC Muro SUB2010 in scale.
Comparison image of Klipsch R-100SW and ELAC Muro SUB2010 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2 and base area of the ELAC Muro SUB2010 is approximately 546.8cm2 / 84.8inch2. The R-100SW requires 169% more surface area than the Muro SUB2010 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-100SW weighs 10.91kg / 24lbs and the ELAC Muro SUB2010 weighs 7.82kg / 17.2lbs. This makes the R-100SW 40% heavier than the Muro SUB2010.
Here is a comparison of how R-100SW and Muro SUB2010's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-100SW?
Here are the items that are included inside the box of R-100SW:
- Powered sub
- Grille (installed)
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
What's in the Box of ELAC Muro SUB2010?
Here are the items that come with the Muro SUB2010:
- Powered subwoofer
- 6-feet AC power cord
- 4 Cone feet
- 2 Brackets
- 2 Machine screws
- 2 Wood screws
- 2 Washers
- 2 Wall anchors
- Operating Instructions
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
32 Hz
vs
38 Hz
|
Generates deeper bass |
 Height |
372mm
vs
388mm
|
Easier to fit in smaller spaces |
 Price per pair* |
275USD
vs
770USD
|
costs less (*prices may change depending on the seller, location and time) |
 High Frequency Response |
150k Hz
vs
120k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Base Surface Area |
546cm2
vs
1468cm2
|
Takes less floor space |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
Klipsch R-100SW |
ELAC Muro SUB2010 |
| Brand |
Klipsch |
ELAC |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
125 watts |
| Frequency Response |
32-120 Hz |
38-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
125-watt RMS |
| Watts Peak (Max) |
300-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
8" |
| Woofer Composition |
Copper-spun IMG |
Polypropylene |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
side or bottom |
Physical Specs |
|
|
| Height |
372.0mm (14.6") |
388.0mm (15.3") |
| Width |
320.0mm (12.6") |
135.0mm (5.3") |
| Depth |
459.0mm (18.1") |
405.0mm (15.9") |
| Weight |
10.91kg (24lbs) |
7.82kg (17.2lbs) |
| Enclosure |
Bass reflex |
Bass Reflex |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
1 Year |
| Labor Warranty |
2 Years |
1 Year |