SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND
Klipsch R-100SW vs Dynaudio Sub 3 Comparison
x
Subwoofer to replace
Change

Klipsch R-100SW

Powered Subwoofer | 32-120 Hz

Klipsch R-100SW
CHECK PRICE
Change
    
Dynaudio Sub 3

Powered Subwoofer | 22-175 Hz

Dynaudio Sub 3
CHECK PRICE
Klipsch R-100SW Klipsch R-100SW
See at AMAZON
Dynaudio Sub 3 Dynaudio Sub 3
See at AMAZON
Klipsch R-100SW
See at AMAZON
Dynaudio Sub 3
See at AMAZON
Klipsch R-100SW vs Dynaudio Sub 3 Speaker Comparison

In this review, we will be comparing R-100SW and Sub 3, two Powered Subwoofer speakers from Klipsch and Dynaudio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-100SW and Dynaudio Sub 3 first before getting into our more detailed comparison.

Klipsch R-100SW Key Specs

  • 10" Copper-spun IMG Woofer
  • 32-120 Hz Frequency Response
  • 150 watts Max Amplifier Output
  • Weight:10.91kg
  • Dimensions (H x W x D): 372.0" x 12-9/16" x 18-1/16"( 372.0 x 320.0 x 459.0mm )

Dynaudio Sub 3 Key Specs

  • 9.5" Magnesium Silicate Polymer Woofer
  • 22-175 Hz Frequency Response
  • 300 watts Max Amplifier Output
  • Weight:10.50kg
  • Dimensions (H x W x D): 277.0" x 10-9/16" x 14-3/8"( 277.0 x 269.0 x 366.0mm )

In the following sections, we will get into details in order to better understand how the Klipsch R-100SW and Dynaudio Sub 3 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.

Drivers

The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch R-100SWand Dynaudio Sub 3 have a single woofer setup however the Klipsch R-100SW's woofer is 10-inch whereas the Dynaudio Sub 3 features a 9.5-inch woofer.

Frequency Response

R-100SW has a frequency range of 32-120 Hz whereas Sub 3 has a frequency range of 22-175 Hz. With a minimum frequency of 22Hz, the Sub 3 can go significantly deeper on the low side and provide stronger bass compared to the R-100SW's min frequency of 32Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.

Low Frequency

Subwoofer Speakers

Klipsch R-100SW
Dynaudio Sub 3
Min
Average
Max
High Frequency

Subwoofer Speakers

Klipsch R-100SW
Dynaudio Sub 3
Min
Average
Max

Cabinet Type

The Klipsch R-100SW has a Bass reflex type cabinet. On the other hand the Dynaudio Sub 3 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-100SW's and Dynaudio Sub 3's external dimensions. Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm ( 14-5/8 x 12-9/16 x 18-1/16inch) whereas Dynaudio Sub 3 has external dimensions of 277.0 x 269.0 x 366.0mm ( 10-7/8 x 10-9/16 x 14-3/8inch) .

Klipsch R-100SW is clearly the larger of the two speakers. Its body is 51mm wider, 95mm taller and 93mm deeper than Dynaudio Sub 3.

Below you can see the front view size comparison of Klipsch R-100SW and Dynaudio Sub 3 in scale.

Klipsch R-100SW vs Dynaudio Sub 3 Size Comparison - Front View
Comparison image of Klipsch R-100SW and Dynaudio Sub 3 Size and External Dimensions

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2 and base area of the Dynaudio Sub 3 is approximately 984.5cm2 / 152.6inch2. The R-100SW requires 49% more surface area than the Sub 3 which gives it a small disadvantage on placement in tight spaces.

Weight Comparison

The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-100SW weighs 10.91kg / 24lbs and the Dynaudio Sub 3 weighs 10.50kg / 23.1lbs. This makes the R-100SW 4% heavier than the Sub 3.

Here is a comparison of how R-100SW and Sub 3's weights compare with the average, max and min weights in Powered Subwoofer class.

Weight
All Subwoofer Speakers
Klipsch R-100SW
Dynaudio Sub 3
Min
Average
Max

What's in the Box of Klipsch R-100SW?

Here are the items that are included inside the box of R-100SW:
  • Powered sub
  • Grille (installed)
  • 6.5-feet AC power cord
  • User Manual
  • Important Safety Instructions
  • Warranty Information
  • What's in the Box of Dynaudio Sub 3?

    Here are the items that come with the Sub 3:
  • Powered subwoofer
  • Grille
  • 6-feet AC power cord
  • Owners Manual
  • Quick Start Guide
  • Warranty Extension Card

  • Reasons to choose Klipsch R-100SW over Dynaudio Sub 3
    Woofer Size 10 inches vs 9.5 inches Larger woofer
    Reasons to choose Dynaudio Sub 3 over Klipsch R-100SW
    Low Frequency Response 22 Hz vs 32 Hz Generates deeper bass
    High Frequency Response 175k Hz vs 120k Hz Generates higher frequency
    Height 277mm vs 372mm Easier to fit in smaller spaces
    Base Surface Area 984cm2 vs 1468cm2 Takes less floor space
    Klipsch R-100SW vs Dynaudio Sub 3 Specs Table
    Detailed comparison of specifications
    General Klipsch R-100SW Dynaudio Sub 3
    Brand Klipsch Dynaudio
    Speaker Type Powered Subwoofer Powered Subwoofer
    Max Amplifier Output 150 watts 300 watts
    Frequency Response 32-120 Hz 22-175 Hz
    Amplifier
    Watts RMS (Continuous) 150-watt RMS 300-watt RMS
    Watts Peak (Max) 300-watt RMS n/a
    Drivers
    Woofer Quantity 1 1
    Woofer Size 10" 9.5"
    Woofer Composition Copper-spun IMG Magnesium Silicate Polymer
    Tweeter Size - -
    Aimable Tweeter No No
    Midrange Driver No No
    Crossover Frequency n/a 50-150Hz and 60Hz/80Hz/FlatHz
    Firing Direction front front
    Physical Specs
    Height 372.0mm (14.6") 277.0mm (10.9")
    Width 320.0mm (12.6") 269.0mm (10.6")
    Depth 459.0mm (18.1") 366.0mm (14.4")
    Weight 10.91kg (24lbs) 10.50kg (23.1lbs)
    Enclosure Bass reflex Acoustic Suspension
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Other
    Parts Warranty 2 Years 3 Years
    Labor Warranty 2 Years 3 Years

    Latest Powered Subwoofers
    Polk Signature Elite ES12
    Polk Signature Elite ES12
    12-inch Woofer | 22-250 Hz | 300 watts
    Polk Signature Elite ES10
    Polk Signature Elite ES10
    10-inch Woofer | 28-250 Hz | 200 watts
    Polk Signature Elite ES8
    Polk Signature Elite ES8
    8-inch Woofer | 32-180 Hz | 100 watts
    JBL Stage 220P
    JBL Stage 220P
    12-inch Woofer | 29-150 Hz | 250 watts
    JBL Stage 200P
    JBL Stage 200P
    10-inch Woofer | 32-150 Hz | 150 watts
    KEF KC92
    KEF KC92
    9-inch Woofer | 11-200 Hz | 1000 watts
    KEF Kube 15 MIE
    KEF Kube 15 MIE
    15-inch Woofer | 20-140 Hz | 300 watts
    KEF Kube 12 MIE
    KEF Kube 12 MIE
    12-inch Woofer | 22-140 Hz | 300 watts
    KEF Kube 10 MIE
    KEF Kube 10 MIE
    10-inch Woofer | 20-140 Hz | 300 watts
    KEF Kube 8 MIE
    KEF Kube 8 MIE
    8-inch Woofer | 34-140 Hz | 300 watts

    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction