In this review, we will be comparing R-100SW and Minx X201, two Powered Subwoofer speakers from Klipsch and Cambridge Audio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-100SW and Cambridge Audio Minx X201 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch R-100SW and Cambridge Audio Minx X201 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch R-100SWand Cambridge Audio Minx X201 have a single woofer setup however the Klipsch R-100SW's woofer is 10-inch whereas the Cambridge Audio Minx X201 features a 6.5-inch woofer.
Frequency Response
R-100SW has a frequency range of 32-120 Hz whereas Minx X201 has a frequency range of 36-200 Hz. With a minimum frequency of 32Hz, the R-100SW can go slightly deeper then the Minx X201's min frequency of 36Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
Cambridge Audio Minx X201
High Frequency
Subwoofer Speakers
Cambridge Audio Minx X201
Cabinet Type
The Klipsch R-100SW has a Bass reflex type cabinet. On the other hand the Cambridge Audio Minx X201 have Passive Radiator type enclosure. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-100SW's and Cambridge Audio Minx X201's external dimensions. Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm ( 14-5/8 x 12-9/16 x 18-1/16inch) whereas Cambridge Audio Minx X201 has external dimensions of 220.0 x 210.0 x 256.0mm ( 8-5/8 x 8-1/4 x 10-1/16inch) .
Klipsch R-100SW is clearly the larger of the two speakers. Its body is 110mm wider, 152mm taller and 203mm deeper than Cambridge Audio Minx X201.
Below you can see the front view size comparison of Klipsch R-100SW and Cambridge Audio Minx X201 in scale.
Comparison image of Klipsch R-100SW and Cambridge Audio Minx X201 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2 and base area of the Cambridge Audio Minx X201 is approximately 537.6cm2 / 83.3inch2. The R-100SW requires 173% more surface area than the Minx X201 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-100SW weighs 10.91kg / 24lbs and the Cambridge Audio Minx X201 weighs 5.00kg / 11lbs. This makes the R-100SW 118% heavier than the Minx X201.
Here is a comparison of how R-100SW and Minx X201's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
Cambridge Audio Minx X201
What's in the Box of Klipsch R-100SW?
Here are the items that are included inside the box of R-100SW:
Powered subGrille (installed)6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Cambridge Audio Minx X201?
Here are the items that come with the Minx X201:
Powered subwooferGrille (installed)6-feet AC power cordInstallation GuideImportant Safety Instructions
 Woofer Size |
10 inches
vs
6.5 inches
|
Larger woofer |
| Low Frequency Response |
32 Hz
vs
36 Hz
|
Generates deeper bass |
 Price per pair* |
275USD
vs
449USD
|
costs less (*prices may change depending on the seller, location and time) |
 High Frequency Response |
200k Hz
vs
120k Hz
|
Generates higher frequency |
 Passive Radiator |
two 6.5-inch
vs
None
|
Increases the bass performance |
 Height |
220mm
vs
372mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
537cm2
vs
1468cm2
|
Takes less floor space |
| General |
Klipsch R-100SW |
Cambridge Audio Minx X201 |
| Brand |
Klipsch |
Cambridge Audio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
200 watts |
| Frequency Response |
32-120 Hz |
36-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
300-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
6.5" |
| Woofer Composition |
Copper-spun IMG |
Aluminum |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
372.0mm (14.6") |
220.0mm (8.7") |
| Width |
320.0mm (12.6") |
210.0mm (8.3") |
| Depth |
459.0mm (18.1") |
256.0mm (10.1") |
| Weight |
10.91kg (24lbs) |
5.00kg (11lbs) |
| Enclosure |
Bass reflex |
Passive Radiator |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
3 Years |
| Labor Warranty |
2 Years |
3 Years |