In this review, we will be comparing SUB8 and DB4S, two Powered Subwoofer speakers from Kanto and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Kanto SUB8 and B&W DB4S first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Kanto SUB8 and B&W DB4S compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Kanto SUB8and B&W DB4S have a single woofer setup however the Kanto SUB8's woofer is 8-inch whereas the B&W DB4S features a 10-inch woofer.
Frequency Response
SUB8 has a frequency range of 35-175 Hz whereas DB4S has a frequency range of 10-350 Hz. With a minimum frequency of 10Hz, the DB4S can go significantly deeper on the low side and provide stronger bass compared to the SUB8's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Kanto SUB8 and B&W DB4S have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Kanto SUB8's and B&W DB4S's external dimensions. Kanto SUB8 has external dimensions of 301.0 x 281.0 x 329.0mm ( 11-13/16 x 11-1/16 x 12-15/16inch) whereas B&W DB4S has external dimensions of 375.0 x 362.0 x 434.0mm ( 14-3/4 x 14-1/4 x 17-1/16inch) .
B&W DB4S is clearly the larger of the two speakers. Its body is 81mm wider, 74mm taller and 105mm deeper than Kanto SUB8.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Kanto SUB8 is approximately 924.5cm2 / 143.3inch2 and base area of the B&W DB4S is approximately 1571.1cm2 / 243.5inch2. The SUB8 requires 41% less surface area than the DB4S which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Kanto SUB8 weighs 7.82kg / 17.2lbs and the B&W DB4S weighs 26.05kg / 57.3lbs. This makes the DB4S 233% heavier than the SUB8.
Here is a comparison of how SUB8 and DB4S's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Kanto SUB8?
Here are the items that are included inside the box of SUB8:
Powered subwoofer6-feet AC power cord9.75-feet mono-RCA cableUser Manual
What's in the Box of B&W DB4S?
Here are the items that come with the DB4S:
Powered subwooferGrille6.5-feet AC power cord4 Decoupling feet4 Rubber feet4 Spike feet4 Lock-nutsCleaning clothQuickstart GuideBowers & Wilkins brochureWarranty InformationCleaning cloth instructions
 Height |
301mm
vs
375mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
924cm2 (281x329mm)
vs
1571cm2 (362x434mm)
|
Takes less floor space |
 Price per pair* |
300USD
vs
2199USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
10 Hz
vs
35 Hz
|
Generates deeper bass |
 High Frequency Response |
350k Hz
vs
175k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
| General |
Kanto SUB8 |
Bowers & Wilkins DB4S |
| Brand |
Kanto |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
125 watts |
1000 watts |
| Frequency Response |
35-175 Hz |
10-350 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
125-watt RMS |
0-watt RMS |
| Watts Peak (Max) |
250-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
10" |
| Woofer Composition |
Paper |
Aerofoil |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
301.0mm (11.9") |
375.0mm (14.8") |
| Width |
281.0mm (11.1") |
362.0mm (14.3") |
| Depth |
329.0mm (13") |
434.0mm (17.1") |
| Weight |
7.82kg (17.2lbs) |
26.05kg (57.3lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |