In this review, we will be comparing Kube 12 MIE and SPL-100, two Powered Subwoofer speakers from KEF and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF Kube 12 MIE and Klipsch SPL-100 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both KEF Kube 12 MIEand Klipsch SPL-100 have a single woofer setup however the KEF Kube 12 MIE's woofer is 12-inch whereas the Klipsch SPL-100 features a 10-inch woofer.
Frequency Response
Kube 12 MIE has a frequency range of 22-140 Hz whereas SPL-100 has a frequency range of 27-125 Hz. With a minimum frequency of 22Hz, the Kube 12 MIE can go significantly deeper on the low side and provide stronger bass compared to the SPL-100's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The KEF Kube 12 MIE has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch SPL-100 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Kube 12 MIE's and Klipsch SPL-100's external dimensions. KEF Kube 12 MIE has external dimensions of 410 x 393 x 410 mm (16.1 x 15.5 x 16.1 in) whereas Klipsch SPL-100 has external dimensions of 418.0 x 358.0 x 478.0mm (16-7/16 x 14-1/16 x 18-13/16inch).
KEF Kube 12 MIE is 8mm shorter and 68mm less deeper than Klipsch SPL-100 but it is also 35mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Kube 12 MIE is approximately 1611.3cm2 / 249.8inch2 and base area of the Klipsch SPL-100 is approximately 1711.2cm2 / 265.2inch2. The Kube 12 MIE requires 6% less surface area than the SPL-100 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF Kube 12 MIE weighs 18.60kg / 40.9lbs and the Klipsch SPL-100 weighs 16.82kg / 37lbs. This makes the Kube 12 MIE 11% heavier than the SPL-100.
Here is a comparison of how Kube 12 MIE and SPL-100's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF Kube 12 MIE?
Here are the items that are included inside the box of Kube 12 MIE:
- Kube 12 MIE subwoofer
- Power cord
- Euroblock speaker level connector
- User manual and warranty information
What's in the Box of Klipsch SPL-100?
Here are the items that come with the SPL-100:
- Powered sub
- Grille
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
22 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
140 Hz
vs
125 Hz
|
Generates higher frequency |
 Height |
410mm
vs
418mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1611cm2
vs
1711cm2
|
Takes less floor space |
 Price per pair* |
399USD
vs
999USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Near-identical footprints. Klipsch SPL-100 stands 68mm further into the room.
| General |
KEF Kube 12 MIE |
Klipsch SPL-100 |
| Brand |
KEF |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
200 watts |
| Frequency Response |
22-140 Hz |
27-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
n/a |
450-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Polypropylene |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
40-140 Hz |
n/a |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
410.0mm (16.1") |
418.0mm (16.5") |
| Width |
393.0mm (15.5") |
358.0mm (14.1") |
| Depth |
410.0mm (16.1") |
478.0mm (18.8") |
| Weight |
18.60kg (40.9lbs) |
16.82kg (37lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | A | KEF Kube 12 MIE goes deeper - 22Hz against 27Hz. A real difference, though most music has little content below 27Hz. |
| Amplifier power | A | KEF Kube 12 MIE has the bigger amplifier - 300W against 200W RMS, about 1.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | KEF Kube 12 MIE moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | KEF Kube 12 MIE is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; Klipsch SPL-100 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | A | KEF Kube 12 MIE takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Price | B | Klipsch SPL-100 costs less - $399 against $999, about 60% less. |
A KEF Kube 12 MIE B Klipsch SPL-100
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: KEF Kube 12 MIE measures better, Klipsch SPL-100 costs about 60% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, Klipsch SPL-100 will hit harder for the money; if it is mainly for music in a normal-sized room, KEF Kube 12 MIE is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, KEF Kube 12 MIE is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.