In this review, we will be comparing KC92 and R-100SW, two Powered Subwoofer speakers from KEF and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of KEF KC92 and Klipsch R-100SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the KEF KC92 and Klipsch R-100SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.KEF KC92 and Klipsch R-100SW have a totally different setup: the KEF KC92 features 2 x 9-inch drivers whereas the R-100SW features 1 x 10-inch drivers.
Frequency Response
KC92 has a frequency range of 11-200 Hz whereas R-100SW has a frequency range of 32-120 Hz. With a minimum frequency of 11Hz, the KC92 can go significantly deeper on the low side and provide stronger bass compared to the R-100SW's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The KEF KC92 has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch R-100SW have Bass reflex type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF KC92's and Klipsch R-100SW's external dimensions. KEF KC92 has external dimensions of 352.5 x 330 x 360.5 mm ( 13.88 x 13.00 x 14.19 in) whereas Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm ( 14-5/8 x 12-9/16 x 18-1/16inch) .
KEF KC92 is 20mm shorter and 98mm less deeper than Klipsch R-100SW but it is also 10mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF KC92 is approximately 1191.3cm2 / 184.7inch2 and base area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2. The KC92 requires 19% less surface area than the R-100SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The KEF KC92 weighs 20.00kg / 44lbs and the Klipsch R-100SW weighs 10.91kg / 24lbs. This makes the KC92 83% heavier than the R-100SW.
Here is a comparison of how KC92 and R-100SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of KEF KC92?
Here are the items that are included inside the box of KC92:
KC92 subwoofer Power cord Euroblock speaker level connector User manual and warranty information
What's in the Box of Klipsch R-100SW?
Here are the items that come with the R-100SW:
Powered subGrille (installed)6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
 Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
11 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
120k Hz
|
Generates higher frequency |
 Height |
352mm
vs
372mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1191cm2 (330x361mm)
vs
1468cm2 (320x459mm)
|
Takes less floor space |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| Woofer Size |
10 inches
vs
9 inches
|
Larger woofer |
 Price per pair* |
275USD
vs
1999USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
KEF KC92 |
Klipsch R-100SW |
| Brand |
KEF |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1000 watts |
150 watts |
| Frequency Response |
11-200 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1000-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
n/a |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
9" |
10" |
| Woofer Composition |
Polypropylene |
Copper-spun IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
40-140 Hz |
n/a |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
352.0mm (13.9") |
372.0mm (14.6") |
| Width |
330.0mm (13") |
320.0mm (12.6") |
| Depth |
361.0mm (14.2") |
459.0mm (18.1") |
| Weight |
20.00kg (44lbs) |
10.91kg (24lbs) |
| Enclosure |
Acoustic Suspension |
Bass reflex |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |