In this review, we will be comparing Stage 220P and PB-1000, two Powered Subwoofer speakers from JBL and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of JBL Stage 220P and SVS PB-1000 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the JBL Stage 220P and SVS PB-1000 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.JBL Stage 220P and SVS PB-1000 have a totally different setup: the JBL Stage 220P features x 12-inch drivers whereas the PB-1000 features 1 x 10-inch drivers.
Frequency Response
Stage 220P has a frequency range of 29-150 Hz whereas PB-1000 has a frequency range of 19-270 Hz. With a minimum frequency of 19Hz, the PB-1000 can go significantly deeper on the low side and provide stronger bass compared to the Stage 220P's min frequency of 29Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The JBL Stage 220P has a Passive Radiator type cabinet. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs. On the other hand the SVS PB-1000 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL Stage 220P's and SVS PB-1000's external dimensions. JBL Stage 220P has external dimensions of 418.0 x 405.0 x 445.0mm ( 16-7/16inch x 15-15/16inch x 17-1/2inch ) whereas SVS PB-1000 has external dimensions of 480.0 x 381.0 x 532.0mm ( 18-7/8 x 15 x 20-15/16inch) .
JBL Stage 220P is 62mm shorter and 87mm less deeper than SVS PB-1000 but it is also 24mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the JBL Stage 220P is approximately 1802.3cm2 / 279.4inch2 and base area of the SVS PB-1000 is approximately 2026.9cm2 / 314.2inch2. The Stage 220P requires 11% less surface area than the PB-1000 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The JBL Stage 220P weighs 18.73kg / 41.2lbs and the SVS PB-1000 weighs 20.91kg / 46lbs. This makes the PB-1000 12% heavier than the Stage 220P.
Here is a comparison of how Stage 220P and PB-1000's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 Height |
418mm
vs
480mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1802cm2
vs
2026cm2
|
Takes less floor space |
| Low Frequency Response |
19 Hz
vs
29 Hz
|
Generates deeper bass |
 High Frequency Response |
270k Hz
vs
150k Hz
|
Generates higher frequency |
 Price per pair* |
499USD
vs
599USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
JBL Stage 220P |
SVS PB-1000 |
| Brand |
JBL |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
250 watts |
300 watts |
| Frequency Response |
29-150 Hz |
19-270 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
250-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
500-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
|
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Polycellulose |
Fiber-composite |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
50-160 Hz and 80 Hz |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
418.0mm (16.5") |
480.0mm (18.9") |
| Width |
405.0mm (15.9") |
381.0mm (15") |
| Depth |
445.0mm (17.5") |
532.0mm (20.9") |
| Weight |
18.73kg (41.2lbs) |
20.91kg (46lbs) |
| Enclosure |
Passive Radiator |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
n/a |
| Available Colors |
Espresso,Latte |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 year |
5 Years |
| Labor Warranty |
1 year |
5 Years |