In this review, we will be comparing L10cs and SPL-100, two Powered Subwoofer speakers from JBL and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of JBL L10cs and Klipsch SPL-100 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the JBL L10cs and Klipsch SPL-100 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.JBL L10csand Klipsch SPL-100 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
L10cs has a frequency range of 32-150 Hz whereas SPL-100 has a frequency range of 27-125 Hz. With a minimum frequency of 27Hz, the SPL-100 can go significantly deeper on the low side and provide stronger bass compared to the L10cs's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both JBL L10cs and Klipsch SPL-100 have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL L10cs's and Klipsch SPL-100's external dimensions. JBL L10cs has external dimensions of 391.0 x 337.0 x 413.0mm ( 15-3/8inch x 13-1/4inch x 16-1/4inch ) whereas Klipsch SPL-100 has external dimensions of 418.0 x 358.0 x 478.0mm ( 16-7/16 x 14-1/16 x 18-13/16inch) .
Klipsch SPL-100 is clearly the larger of the two speakers. Its body is 21mm wider, 27mm taller and 65mm deeper than JBL L10cs.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the JBL L10cs is approximately 1391.8cm2 / 215.7inch2 and base area of the Klipsch SPL-100 is approximately 1711.2cm2 / 265.2inch2. The L10cs requires 19% less surface area than the SPL-100 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The JBL L10cs weighs 14.09kg / 31lbs and the Klipsch SPL-100 weighs 16.82kg / 37lbs. This makes the SPL-100 19% heavier than the L10cs.
Here is a comparison of how L10cs and SPL-100's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of JBL L10cs?
Here are the items that are included inside the box of L10cs:
Powered subwoofer6-feet AC power cord4 SpikesQuick Start GuideImportant Safety Instructions
What's in the Box of Klipsch SPL-100?
Here are the items that come with the SPL-100:
Powered subGrille6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
 High Frequency Response |
150k Hz
vs
125k Hz
|
Generates higher frequency |
 Height |
391mm
vs
418mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1391cm2 (337x413mm)
vs
1711cm2 (358x478mm)
|
Takes less floor space |
 Driver Setup |
1-way
vs
-way
|
Have a dedicated mid-range driver |
 Low Frequency Response |
27 Hz
vs
32 Hz
|
Generates deeper bass |
 Price per pair* |
399USD
vs
699USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
JBL L10cs |
Klipsch SPL-100 |
| Brand |
JBL |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
250 watts |
200 watts |
| Frequency Response |
32-150 Hz |
27-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
250-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
500-watt RMS |
450-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Polycellulose |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
bottom |
front |
Physical Specs |
|
|
| Height |
391.0mm (15.4") |
418.0mm (16.5") |
| Width |
337.0mm (13.3") |
358.0mm (14.1") |
| Depth |
413.0mm (16.3") |
478.0mm (18.8") |
| Weight |
14.09kg (31lbs) |
16.82kg (37lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Available Colors |
Natural Walnut,Black Walnut |
n/a |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
2 Years |
| Labor Warranty |
1 Year |
2 Years |