In this review, we will be comparing Varro DS1000-BG and SPL-100, two Powered Subwoofer speakers from ELAC and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC Varro DS1000-BG and Klipsch SPL-100 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the ELAC Varro DS1000-BG and Klipsch SPL-100 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.ELAC Varro DS1000-BG and Klipsch SPL-100 have a totally different setup: the ELAC Varro DS1000-BG features 2 x 10-inch drivers whereas the SPL-100 features 1 x 10-inch drivers.
Frequency Response
Varro DS1000-BG has a frequency range of 18-150 Hz whereas SPL-100 has a frequency range of 27-125 Hz. With a minimum frequency of 18Hz, the Varro DS1000-BG can go significantly deeper on the low side and provide stronger bass compared to the SPL-100's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The ELAC Varro DS1000-BG has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch SPL-100 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Varro DS1000-BG's and Klipsch SPL-100's external dimensions. ELAC Varro DS1000-BG has external dimensions of 372.0 x 431.0 x 372.0mm ( 14-5/8inch x 16-15/16inch x 14-5/8inch ) whereas Klipsch SPL-100 has external dimensions of 418.0 x 358.0 x 478.0mm ( 16-7/16 x 14-1/16 x 18-13/16inch) .
ELAC Varro DS1000-BG is 46mm shorter and 106mm less deeper than Klipsch SPL-100 but it is also 73mm wider.
Below you can see the front view size comparison of ELAC Varro DS1000-BG and Klipsch SPL-100 in scale.
Comparison image of ELAC Varro DS1000-BG and Klipsch SPL-100 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Varro DS1000-BG is approximately 1603.3cm2 / 248.5inch2 and base area of the Klipsch SPL-100 is approximately 1711.2cm2 / 265.2inch2. The Varro DS1000-BG requires 6% less surface area than the SPL-100 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC Varro DS1000-BG weighs 32.45kg / 71.4lbs and the Klipsch SPL-100 weighs 16.82kg / 37lbs. This makes the Varro DS1000-BG 93% heavier than the SPL-100.
Here is a comparison of how Varro DS1000-BG and SPL-100's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of ELAC Varro DS1000-BG?
Here are the items that are included inside the box of Varro DS1000-BG:
2 Grilles Power Cord 4 Spikes
What's in the Box of Klipsch SPL-100?
Here are the items that come with the SPL-100:
Powered subGrille6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
 Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
18 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
150k Hz
vs
125k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
372mm
vs
418mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1603cm2 (431x372mm)
vs
1711cm2 (358x478mm)
|
Takes less floor space |
 Ethernet Connection |
Yes
vs
No
|
High quality streaming over Ethernet |
 Price per pair* |
399USD
vs
2499USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
ELAC Varro DS1000-BG |
Klipsch SPL-100 |
| Brand |
ELAC |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1000 watts |
200 watts |
| Frequency Response |
18-150 Hz |
27-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1000-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
2000-watt RMS |
450-watt RMS |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Aluminum |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
372.0mm (14.6") |
418.0mm (16.5") |
| Width |
431.0mm (17") |
358.0mm (14.1") |
| Depth |
372.0mm (14.6") |
478.0mm (18.8") |
| Weight |
32.45kg (71.4lbs) |
16.82kg (37lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Finish |
MDF |
n/a |
| Available Colors |
Gloss Black |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| USB Port |
USB-A port for firmware updates |
n/a |
| Ethernet Port |
Yes |
n/a |
Other |
|
|
| Parts Warranty |
1 year |
2 Years |
| Labor Warranty |
1 year |
2 Years |