In this review, we will be comparing Debut S10 2 and PB-1000, two Powered Subwoofer speakers from ELAC and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC Debut S10 2 and SVS PB-1000 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.ELAC Debut S10 2and SVS PB-1000 have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
Debut S10 2 has a frequency range of 35-150 Hz whereas PB-1000 has a frequency range of 19-270 Hz. With a minimum frequency of 19Hz, the PB-1000 can go significantly deeper on the low side and provide stronger bass compared to the Debut S10 2's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut S10 2's and SVS PB-1000's external dimensions. ELAC Debut S10 2 has external dimensions of 368.3 x 344.5 x 379.4mm () whereas SVS PB-1000 has external dimensions of 480.0 x 381.0 x 532.0mm (18-7/8 x 15 x 20-15/16inch).
SVS PB-1000 is clearly the larger of the two speakers. Its body is 36.5mm wider, 111.7mm taller and 152.6mm deeper than ELAC Debut S10 2.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut S10 2 is approximately 1307.0cm2 / 202.6inch2 and base area of the SVS PB-1000 is approximately 2026.9cm2 / 314.2inch2. The Debut S10 2 requires 36% less surface area than the PB-1000 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC Debut S10 2 weighs 13.02kg / 28.6lbs and the SVS PB-1000 weighs 20.91kg / 46lbs. This makes the PB-1000 61% heavier than the Debut S10 2.
Here is a comparison of how Debut S10 2 and PB-1000's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Height |
368mm
vs
480mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1307cm2
vs
2026cm2
|
Takes less floor space |
 Price per pair* |
399USD
vs
499USD
|
costs less (*prices may change depending on the seller, location and time) |
 Low Frequency Response |
19 Hz
vs
35 Hz
|
Generates deeper bass |
 High Frequency Response |
270 Hz
vs
150 Hz
|
Generates higher frequency |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
SVS PB-1000 needs about 55% more floor area. SVS PB-1000 stands 153mm further into the room. SVS PB-1000 is 112mm taller.
| General |
ELAC Debut S10 2 |
SVS PB-1000 |
| Brand |
ELAC |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
35-150 Hz |
19-270 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
100-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
200-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
|
Fiber-composite |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
50-160 Hz and 80 Hz |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
368.3mm (14.5") |
480.0mm (18.9") |
| Width |
344.5mm (13.6") |
381.0mm (15") |
| Depth |
379.4mm (14.9") |
532.0mm (20.9") |
| Weight |
13.02kg (28.6lbs) |
20.91kg (46lbs) |
| Enclosure |
|
Bass Reflex |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
5 Years |
| Labor Warranty |
3 Years |
5 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | B | SVS PB-1000 goes deeper - 19Hz against 35Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | SVS PB-1000 has the bigger amplifier - 300W against 100W RMS, about 4.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | evenly matched | Near-identical radiating area (10" against 10"). |
| Enclosure | evenly matched | Both are ported designs, so they roll off in much the same way. |
| Cabinet size | depends | ELAC Debut S10 2 is about 51% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | SVS PB-1000 carries 5 years on parts against 3 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | ELAC Debut S10 2 costs less - $399 against $499, about 20% less. |
A ELAC Debut S10 2 B SVS PB-1000
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
SVS PB-1000 leads across most of the measured areas for a modest premium, so it is the easier pick if the budget stretches. ELAC Debut S10 2 is the one to take if it does not. If placement is the constraint - a corner, behind a sofa, under a desk - ELAC Debut S10 2 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.