In this review, we will be comparing Debut 2.0 SUB3030 and DB4S, two Powered Subwoofer speakers from ELAC and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC Debut 2.0 SUB3030 and B&W DB4S first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both ELAC Debut 2.0 SUB3030and B&W DB4S have a single woofer setup however the ELAC Debut 2.0 SUB3030's woofer is 12-inch whereas the B&W DB4S features a 10-inch woofer.
Frequency Response
Debut 2.0 SUB3030 has a frequency range of 25-150 Hz whereas DB4S has a frequency range of 10-350 Hz. With a minimum frequency of 10Hz, the DB4S can go significantly deeper on the low side and provide stronger bass compared to the Debut 2.0 SUB3030's min frequency of 25Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The ELAC Debut 2.0 SUB3030 has a Passive radiator type cabinet. On the other hand the B&W DB4S have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC Debut 2.0 SUB3030's and B&W DB4S's external dimensions. ELAC Debut 2.0 SUB3030 has external dimensions of 462.0 x 451.0 x 464.0mm (18-3/16 x 17-3/4 x 18-1/4inch) whereas B&W DB4S has external dimensions of 375.0 x 362.0 x 434.0mm (14-3/4 x 14-1/4 x 17-1/16inch).
ELAC Debut 2.0 SUB3030 is clearly the larger of the two speakers. Its body is 89mm wider, 87mm taller and 30mm deeper than B&W DB4S.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC Debut 2.0 SUB3030 is approximately 2092.6cm2 / 324.4inch2 and base area of the B&W DB4S is approximately 1571.1cm2 / 243.5inch2. The Debut 2.0 SUB3030 requires 33% more surface area than the DB4S which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC Debut 2.0 SUB3030 weighs 22.80kg / 50.2lbs and the B&W DB4S weighs 26.05kg / 57.3lbs. This makes the DB4S 14% heavier than the Debut 2.0 SUB3030.
Here is a comparison of how Debut 2.0 SUB3030 and DB4S's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of ELAC Debut 2.0 SUB3030?
Here are the items that are included inside the box of Debut 2.0 SUB3030:
- Powered subwoofer
- 9-feet AC power cord
- 4 Spikes
- 4 Hex-nuts
- Operating Instructions
What's in the Box of B&W DB4S?
Here are the items that come with the DB4S:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Decoupling feet
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Cleaning cloth
- Quickstart Guide
- Bowers & Wilkins brochure
- Warranty Information
- Cleaning cloth instructions
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 Price per pair* |
900USD
vs
2199USD
|
costs less (*prices may change depending on the seller, location and time) |
| Low Frequency Response |
10 Hz
vs
25 Hz
|
Generates deeper bass |
 High Frequency Response |
350 Hz
vs
150 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
375mm
vs
462mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1571cm2
vs
2092cm2
|
Takes less floor space |
| General |
ELAC Debut 2.0 SUB3030 |
Bowers & Wilkins DB4S |
| Brand |
ELAC |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
500 watts |
1000 watts |
| Frequency Response |
25-150 Hz |
10-350 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
500-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Doped Paper |
Aerofoil |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
462.0mm (18.2") |
375.0mm (14.8") |
| Width |
451.0mm (17.8") |
362.0mm (14.3") |
| Depth |
464.0mm (18.3") |
434.0mm (17.1") |
| Weight |
22.80kg (50.2lbs) |
26.05kg (57.3lbs) |
| Enclosure |
Passive radiator |
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
2 Years |
| Labor Warranty |
1 Year |
2 Years |
A passive radiator subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | B&W DB4S goes deeper - 10Hz against 25Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | B&W DB4S has the bigger amplifier - 1000W against 500W RMS, about 3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | ELAC Debut 2.0 SUB3030 moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | ELAC Debut 2.0 SUB3030 is passive radiator - a passive radiator behaves like a port without the pipe noise, and suits a slim cabinet; B&W DB4S is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | B&W DB4S is about 39% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | B&W DB4S carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | ELAC Debut 2.0 SUB3030 costs less - $900 against $2,199, about 59% less. |
A ELAC Debut 2.0 SUB3030 B B&W DB4S
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: B&W DB4S measures better, ELAC Debut 2.0 SUB3030 costs about 59% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, ELAC Debut 2.0 SUB3030 will hit harder for the money; if it is mainly for music in a normal-sized room, B&W DB4S is usually the easier one to make sound right. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $900 each, two ELAC Debut 2.0 SUB3030 cost about $1,800 against $2,199 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.