In this review, we will be comparing DS153 and DB4S, two Powered Subwoofer speakers from ELAC and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC DS153 and B&W DB4S first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both ELAC DS153and B&W DB4S have a single woofer setup however the ELAC DS153's woofer is 15-inch whereas the B&W DB4S features a 10-inch woofer.
Frequency Response
DS153 has a frequency range of 20-150 Hz whereas DB4S has a frequency range of 10-350 Hz. With a minimum frequency of 10Hz, the DB4S can go significantly deeper on the low side and provide stronger bass compared to the DS153's min frequency of 20Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC DS153's and B&W DB4S's external dimensions. ELAC DS153 has external dimensions of 485.8 x 469.9 x 552.5mm () whereas B&W DB4S has external dimensions of 375.0 x 362.0 x 434.0mm (14-3/4 x 14-1/4 x 17-1/16inch).
ELAC DS153 is clearly the larger of the two speakers. Its body is 107.9mm wider, 110.8mm taller and 118.5mm deeper than B&W DB4S.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC DS153 is approximately 2596.2cm2 / 402.4inch2 and base area of the B&W DB4S is approximately 1571.1cm2 / 243.5inch2. The DS153 requires 65% more surface area than the DB4S which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC DS153 weighs 25.10kg / 55.2lbs and the B&W DB4S weighs 26.05kg / 57.3lbs. This makes the DB4S 4% heavier than the DS153.
Here is a comparison of how DS153 and DB4S's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
15 inches
vs
10 inches
|
Larger woofer |
 Price per pair* |
949USD
vs
2199USD
|
costs less (*prices may change depending on the seller, location and time) |
| Low Frequency Response |
10 Hz
vs
20 Hz
|
Generates deeper bass |
 High Frequency Response |
350 Hz
vs
150 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
375mm
vs
485mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1571cm2
vs
2596cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
ELAC DS153 needs about 65% more floor area. ELAC DS153 stands 119mm further into the room. ELAC DS153 is 111mm taller.
| General |
ELAC DS153 |
Bowers & Wilkins DB4S |
| Brand |
ELAC |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
20-150 Hz |
10-350 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
n/a |
| Watts Peak (Max) |
600-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
15" |
10" |
| Woofer Composition |
|
Aerofoil |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
485.8mm (19.1") |
375.0mm (14.8") |
| Width |
469.9mm (18.5") |
362.0mm (14.3") |
| Depth |
552.5mm (21.8") |
434.0mm (17.1") |
| Weight |
25.10kg (55.2lbs) |
26.05kg (57.3lbs) |
| Enclosure |
|
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
2 Years |
| Labor Warranty |
1 Year |
2 Years |
Two quite different sizes of subwoofer. Room volume decides this more than anything else on the page: a big driver in a small room is wasted, and a small one in a large room is worked to death.
| Area | Better | Why |
|---|
| Bass depth | B | B&W DB4S goes deeper - 10Hz against 20Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | B&W DB4S has the bigger amplifier - 1000W against 300W RMS, about 5.2dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | ELAC DS153 moves more air: 15" against 10" is 2.25x the cone area, not the 1.5x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Cabinet size | depends | B&W DB4S is about 53% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | B&W DB4S carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | ELAC DS153 costs less - $949 against $2,199, about 57% less. |
A ELAC DS153 B B&W DB4S
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: B&W DB4S measures better, ELAC DS153 costs about 57% less. In a normal room, placement will make a bigger difference than the gap between these two. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $949 each, two ELAC DS153 cost about $1,898 against $2,199 for one of the other, which is worth a thought. If placement is the constraint - a corner, behind a sofa, under a desk - B&W DB4S is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.