In this review, we will be comparing DS123 and R-100SW, two Powered Subwoofer speakers from ELAC and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of ELAC DS123 and Klipsch R-100SW first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both ELAC DS123and Klipsch R-100SW have a single woofer setup however the ELAC DS123's woofer is 12-inch whereas the Klipsch R-100SW features a 10-inch woofer.
Frequency Response
DS123 has a frequency range of 28-150 Hz whereas R-100SW has a frequency range of 32-120 Hz. With a minimum frequency of 28Hz, the DS123 can go slightly deeper then the R-100SW's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ELAC DS123's and Klipsch R-100SW's external dimensions. ELAC DS123 has external dimensions of 374.7 x 360.4 x 446.1mm () whereas Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm (14-5/8 x 12-9/16 x 18-1/16inch).
Klipsch R-100SW is 40.4mm narrower and 2.7mm shorter than ELAC DS123 but it is also 12.9mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ELAC DS123 is approximately 1607.7cm2 / 249.2inch2 and base area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2. The DS123 requires 9% more surface area than the R-100SW which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The ELAC DS123 weighs 13.70kg / 30.1lbs and the Klipsch R-100SW weighs 10.91kg / 24lbs. This makes the DS123 26% heavier than the R-100SW.
Here is a comparison of how DS123 and R-100SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
28 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
150 Hz
vs
120 Hz
|
Generates higher frequency |
 Height |
372mm
vs
374mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1468cm2
vs
1607cm2
|
Takes less floor space |
 Price per pair* |
275USD
vs
599USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
ELAC DS123 needs about 9% more floor area.
| General |
ELAC DS123 |
Klipsch R-100SW |
| Brand |
ELAC |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
28-150 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
400-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
|
Copper-spun IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
374.7mm (14.8") |
372.0mm (14.6") |
| Width |
360.4mm (14.2") |
320.0mm (12.6") |
| Depth |
446.1mm (17.6") |
459.0mm (18.1") |
| Weight |
13.70kg (30.1lbs) |
10.91kg (24lbs) |
| Enclosure |
|
Bass reflex |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
1 Year |
2 Years |
| Labor Warranty |
1 Year |
2 Years |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | A | ELAC DS123 goes deeper - 28Hz against 32Hz. A real difference, though most music has little content below 32Hz. |
| Amplifier power | A | ELAC DS123 has the bigger amplifier - 200W against 150W RMS, about 1.2dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | ELAC DS123 moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | ELAC DS123 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; Klipsch R-100SW is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Warranty | B | Klipsch R-100SW carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | Klipsch R-100SW costs less - $275 against $599, about 54% less. |
A ELAC DS123 B Klipsch R-100SW
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: ELAC DS123 measures better, Klipsch R-100SW costs about 54% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, Klipsch R-100SW will hit harder for the money; if it is mainly for music in a normal-sized room, ELAC DS123 is usually the easier one to make sound right. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $275 each, two Klipsch R-100SW cost about $550 against $599 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.